User Instructions

INSTALLATION GUIDE

ENGLISH

Code: ARAS600

Name: ARAD rails dedicated for RACK19"

cabinets - 600mm depth

IM ARAS600

Edition: 4 from 30.01.2017

Supersedes: 3 from 07.12.2015

1. Intended use:

The ARAS600 rail is intended for mounting RACK enclosures, type: ARAD2/ ARAD3/ ARAD4 in a 600mm deep

RACK 19” cabinet.

2. Specifications.

SPECIFICATIONS

Mounting dimensions:

H=1U, D=415÷608 [mm, +/-2]

Net / gross weight:

2,49 / 2,58 [kg]

Static load:

30kg

Notes:

- four-point butt mounting to RACK profiles + supported on front and rear RACK profiles

- 4 M6 screws + cage nuts included

- 4 M4 screws included – to bolt the RACK enclosure

Materials:

- sheet metal DC01, 1mm thick, RAL9005

- sliding rails – fully extendable

Use:

inside

Declarations, warranty:

CE, 2 year from the production date

PAGE 1
INSTALLATION GUIDE ENGLISH Code: ARAS600 Name: ARAD rails dedicated for RACK19" cabinets - 600mm depth IM ARAS600 Edition: 4 from 30.01.2017 Supersedes: 3 from 07.12.2015 EN 1. Intended use: The ARAS600 rail is intended for mounting RACK enclosures, type: ARAD2/ ARAD3/ ARAD4 in a 600mm deep RACK 19” cabinet. 2. Specifications.
PAGE 2
3. Assembling instructions: 3.1. Mount the M6 cage nuts to the RACK cabinet, as shown in the picture below. Then, mount the ARAS rails. Take notice of the correct positioning of the horizontal rails. Adjust their length between the front and back RACK profiles. 3.2. Place the ARAD enclosure onto the slid-out ARAS rails. Next, bolt it from the inside with 4xM4 screws (included). The enclosure is to be fixed to the front part of the RACK rails with four M6 screws.