User Instructions

INSTALLA TION GUIDE

ENGLISH

Code: ARAS450

Name: ARAD rails dedicated for RACK19"

cabinets - 450mm depth

IM ARAS450

Edition: 1 from 30.01.2017

Supersedes: ------------

1. Intended use:

The ARAS450 rail is intended for mounting RACK enclosures, type: ARAD2S/ ARAD3S/ ARAD4S in a 450mm deep

RACK 19” cabinet.

sliding rails – fully extendable

2. Specifications.

SPECIFICATIONS

Mounting dimensions:

H=1U, D=262÷388 [mm, +/-2]

Net / gross weight:

1,65 / 1,80 [kg]

Materials:

- sheet metal DC01, 1mm thick, RAL9005

- sliding rails – fully extendable

Static load:

30kg

Notes:

- four-point butt mounting to RACK profiles + supported on front and rear RACK profiles

- 4 M6 screws + cage nuts included

- 4 M4 screws included – to bolt the RACK enclosure

Use:

inside

Declaration, warranty:

CE, 2 year from the production date

PAGE 1
INSTALLA TION GUIDE ENGLISH Code: ARAS450 Name: ARAD rails dedicated for RACK19" cabinets - 450mm depth IM ARAS450 Edition: 1 from 30.01.2017 Supersedes: ------------ EN 1. Intended use: The ARAS450 rail is intended for mounting RACK enclosures, type: ARAD2S/ ARAD3S/ ARAD4S in a 450mm deep RACK 19” cabinet. sliding rails – fully extendable 2. Specifications.
PAGE 2
3. Assembling instructions: 3.1. Mount the M6 cage nuts to the RACK cabinet, as shown in the picture below. Then, mount the ARAS rails. Take notice of the correct positioning of the horizontal rails. Adjust their length between the front and back RACK profiles. 3.2. Place the ARAD enclosure onto the slid-out ARAS rails. Next, bolt it from the inside with M4 screws (included). The enclosure is to be fixed to the front part of the RACK rails with four 4xM6 screws.