Owner's manual

51
15. Factory Default Values
Parameter Factory Set Value
Digital Input #1 INACTIVE, normally closed
Digital Input #2 INACTIVE, normally closed
Analog Input #1 INACTIVE
Analog Input #2 INACTIVE
Digital Output #1 ON/OFF indication, normally closed
Digital Output #2 AUTO/MANUAL Indication, normally closed
Digital Output #3 ALARM Indication, normally closed
Security Code Default = 0000
Language ENGLISH
MODE Local (Manual)
UNITS GPM (gallons per minute)
16. Retrieval of Setup Information
Users can access the system SETUP : INFORMATION menu, which will list the following data,
this may be helpful in troubleshooting:
 Controller software revisions
 Pump serial number
 MPC VECTOR model number
 Pump maximum flow and PulsaGuard minimum flow setpoint
 Pump maximum speed and PulsaGuard minimum current setpoint
17. Special Key Press Access
In This SCREEN Press MENU and ENTER at the same time to:
MENU
ANALOG I/O
Show calibration and RAW data for analog inputs
MENU
DIGITAL I/O
Feature not available
Press the MENU key to exit from any of these special screens.