Instruction Manual

25
Appendix A – Specifications
Pump Model RGT 10 RGT 12
Maximum Flow, GPM (LPM) @ 3450 RPM 14.5 (55.0) 23.3 (88.3)
Maximum Flow, GPM (LPM) @ 2875 RPM 11.0 (41.7) 19.0 (72.0)
Maximum Flow, GPM (LPM) @ 1725 RPM 4.5 (17.1) 9.8 (37.1)
Maximum Head, FT ( METERS) 427 (130) 693 (211)
Maximum Discharge Pressure, PSIG (Bar) 300 (20.7) 300 (20.7)
Maximum Suction Pressure, PSIG (Bar) 100 (6.9) 100 (6.9)
Suction Size 1” FNPT/FBSPT 1” FNPT/FBSPT
Discharge Size 1” FNPT/FBSPT 1” FNPT/FBSPT
Temperature Range, Neodymium -150º to +300º F
-101º to +149º C
-150º to +300º F
-101º to +149º C
Temperature Range, Samarium -150º to +450º F
-101º to +232º C
-150º to +450º F
-101º to +232º C
Maximum Viscosity* cp 100 100
Speeds RPM 3450, 2875, 1725 3450, 2875, 1725
Weight, LBS, (KG) 36 (16.40) 40 (18.1)
Maximum Power 5 HP 7-1/2 HP
*Consult factory for viscosity requirements higher than 100 cp
Appendix B – Bolt Pattern
1. Torque all six fasteners to 110 in-lbs (12.4 N-m) first, following the sequence in the Figure 10
below.
2. Then torque all fasteners to the final value of 220 in-lbs (24.8 N-m), again following the same
sequence.
Figure 10