Instruction Manual

6
Figure 4 – Parts ListLocation
1. Locate a space approximately 3’ x 3’ that is convenient to system piping and to an electrical
outlet or power source.
2. Place the tank stand in the installation location with the front (pump head/wet end side)
facing out.
THE ASSEMBLY IS VERY HEAVY AND HELP MAY BE REQUIRED. DO NOT LIFT THE
STAND BY THE PLUMBING STACK
(S). LIFT THE UNIT BY THE METAL FRAME OF THE
STAND ASSEMBLY
. USE GLOVES AS THE STAND MAY HAVE SHARP EDGES.
2.1.3 Plumbing
1. Attach the plumbing stack on the side of the stand to the closed loop system using a union
and shut off valve (not supplied).
Figure 5 – Closed Loop Connection