Troubleshooting guide

54
Appendix II – Oil Specifications
PULSAlube Universal 1HG
MSDS Number: 775465
Appearance: Clear and bright
Physical Form: Liquid
Odor: Petroleum
Odor Threshold: No data
pH: Not applicable
Vapor Pressure: <1 mm Hg
Vapor Density (air=1): >1
Boiling Point/Range: No data
Melting/Freezing Point: <10.4°F / <-12°C
Pour Point: <10.4°F / <-12°C
Solubility in Water: Negligible
Partition Coefficient (n-octanol/water) (Kow): No data
Specific Gravity: 0.86 - 0.90 @ 60ºF (15.6ºC)
Bulk Density: 7.1 - 7.5 lbs/gal
Viscosity: 5 - 32 cSt @ 100°C; 30 - 500 cSt @ 40°C
Percent Volatile: Negligible
Evaporation Rate (nBuAc=1): No data
Flash Point: >302°F / >150°C
Test Method: Pensky-Martens Closed Cup (PMCC)
ASTM D93, EPA 1010
LEL (vol % in air): No data
UEL (vol % in air): No data
Auto-ignition Temperature: No data
PULSAlube Ultra 6HGS
MSDS Number: 98E374
Physical State: Liquid
Color: Orange
Odor: Characteristic
Odor Threshold: N/D
Relative Density (at 15 C): 0.857
Flash Point [Method]: >210C (410F) [ ASTM D-92]
Flammable Limits
(Approximate volume % in air): LEL: 0.9 UEL: 7.0
Auto ignition Temperature: N/D
Boiling Point / Range: > 260C (500F)
Vapor Density (Air = 1): > 2 at 101 kPa
Vapor Pressure: < 0.013 kPa (0.1 mm Hg) at 20 C
Evaporation Rate (n-butyl acetate = 1): N/D
pH: N/A
Log Pow (n-Octanol/Water Partition Coefficient): > 3.5
Solubility in Water: Negligible
Viscosity: 68 cSt (68 mm2/sec) at 40 C | 10.9 cSt (10.9
mm2/sec) at 100C
Oxidizing Properties: See Hazards Identification Section.
Freezing Point: N/D
Melting Point: N/A
Pour Point: -45°C (-49°F)