Troubleshooting guide

22
7.1 Wet End Removal, Inspection, and Reinstallation
IF THE DIAPHRAGM HAS FAILED, PROCESS FLUID MAY HAVE CONTAMINATED THE
PUMP OIL. HANDLE WITH APPROPRIATE CARE, CLEAN AND REPLACE OIL IF
REQUIRED
.
DUE TO THE SIZE AND WEIGHT OF WET END COMPONENTS, CARE MUST BE USED TO
SELECT THE PROPER TOOLS AND LIFTING EQUIPMENT FOR HEAVY LOADS
.
Figure 12
PulsaPro Series diaphragms do not have a specific cycle life. However, the accumulation of
foreign material or the entrapment of sharp particles between the diaphragm and dish cavity can
eventually cause failure. Failure can also occur as a result of hydraulic system malfunction or
chemical attack. Periodic diaphragm inspection and replacement is recommended.
TAKE ALL PRECAUTIONS TO PREVENT ENVIRONMENTAL AND PERSONNEL EXPOSURE
TO HAZARDOUS MATERIALS
.