Troubleshooting guide

12
6. Equipment Startup
6.1 Lubrication
PULSAPRO 900 PUMPS USE PULSALUBE UNIVERSAL 1HG OIL AS STANDARD FOR THE
PUMP HEAD AND GEARBOX
. USE OF ALTERNATIVE LUBRICANTS COULD IMPAIR
PERFORMANCE
, DAMAGE THE PUMP AND VOID THE WARRANTY.
6.1.1 Oil Capacities
The approximate amounts of oil required to fill the PulsaPro 900 to the specified level is:
Pulsalube Universal 1HG is standard oil supplied with all pumps unless
specified. Temperatures +40 – 280 °F
Total - Pump Head and Gear Box 25
94.6
Gallons
Liters
PULSAlube Universal 1HG is available as follows:
• 1 quart (0.94 liters) Part #: 1HG-1QT
• 1 gallon (3.79 liters) Part #: 1HG-1GL
• 5 gallons (18.9 liters) Part #: 1HG-5GL
• 55 gallons (208.2 liters) Part #: 1HG-55GL
It is recommended that adequate supplies of Pulsalube Universal 1HG be on hand for
periodic changes and emergency requirements.
Pulsafeeder also offers oil options for extreme operating conditions.
Pulsalube Ultra 6HGS is Non-standard oil and is for special applications
Temperatures -40 – 400 °F
Total - Pump Head and Gear Box 25
94.6
Gallons
Liters
PULSAlube Ultra 6HGS is available as follows:
• 1 gallon (3.79 liters) Part #: 6HGS-1GL
• 5 gallons (18.9 liters) Part #: 6HGS-5GL
• 55 gallons (208.2 liters) Part #: 6HGS-55G