Specifications
8
The last three digits of the model string are referred to as the Suffix Code. It is through the suffix code that the pump
can be customized with optional features or customer specific features, e.g. private labeling. If your company has spe-
cific features that will be ordered on every pump, contact customer service with a description of what you want custom-
ized. We will then assign a unique suffix code that can be used as the last three digits in the model string when you
place an order.
Standard Suffix Code Descriptions:
On the following pages are additional features that can be added to your PULSAtron pump through the use of the Suf-
fix Code. Anytime you order a pump with one of these codes, it will be configured with that option.
CZ_ _ _ _XXX = CE Approval
This suffix code tells us that you require CE Approval on the pump you are ordering. This suffix code is seven to nine
digits and can be used in conjunction with other suffix codes by replacing the XXX after the CZ _ _ _ _with another suf-
fix code. For instance, if you require CE Approval and a Five Function Valve, the suffix code would be CZEURO500.
130 = PVDF Tubing
This suffix code will replace the standard pump tubing with PVDF Tubing.
500 = Five Function Valve
The five function valve is easily installed, no tools required. The valve operates with all PULSAtron models up to 240
GPD. The five function valve is packed with features that increase safety, enhance performance and generally im-
proves the convenience of operation.
LB02SA-PTC1-XXX
Suffix Code
OPERATION
The functions are selected by setting two dual position
selector knobs. The label on the back panel of the valve
identifies each function with selector knob positions.
The five function valve is compatible with most PULSAtron
pumps. Connected to the existing discharge valve the five
function valve is capable of handling a large output flow as
well as viscous liquids. A return port located on the side
body provides flow of chemical back to the solution tank
when in the air bleed or drain discharge mode.
FEATURES
Pressure Relief – Allows for relief of excessive pressure in
discharge line to protect connections and tubing.
Back Pressure – Maintains output reproducibility and allows
metering into atmospheric discharge.
Anti-Siphon – Prevents siphoning through the pump when
point of injection is lower than the pump or into the suction
line of another pump. Rated at total vacuum.
Air Bleed – Used during priming to manually remove air from
the pump head.
Discharge Drain – Depressurize pump discharge line without
loosening tubing or fittings. Protects the operator from
chemical exposure.
Selection Guide cont’d.
REAR VIEW FRONT VIEW
SPECIFICATIONS
Material Of Construction:
Valve Body Polyvinylidene Flouride (PVDF)
Diaphragm TFE faced CSPE
O-Rings TFE
Hardware 18-8 Stainless Steel (Recessed)
Maximum Operating
Pressure: 300 PSI/21 BAR (except PVC)
Maximum Flow: 10 GPH (37.85 LPH)
Maximum Viscosity: 1000 CPS
Pressure Relief
Settings: 275 PSI (17 BAR) - red
(nominal cracking 175 PSI (12 BAR) - green
pressure) 125 PSI (8.6 BAR) - blue
50 PSI (2.8 BAR) - black (PVC only)
Note: Pressure relief will occur at no more than 50% above maximum rating of
pump.
Suffix Code: