Specifications

KOPkits

Selecting a KOPkit:

All KOPkit model strings begin with the letter K. The remainder of the string can be determined by knowing your pump

model.

When you select your KOPkit, you will need to build the model number based on the pump model string that you pur-

chased. The two pieces of information you need are the head size and the wet-end code, which is part of the model

string of the pump.

The pump head size is the fourth digit in the pump model number.

LB02SA-PTC1-XXX

The 2 represents your pump head size.

Digits 7-20 in the pump model string represent the wet-end code. It is the group of four digits set apart by the dash

lines.

LB02SA-PTC1-XXX

These four digits represent your wet-end code.

In the following selection guide, you will break down your wet-end code into the four parts to get your total price for the

KOPkit. The four digits in the wet-end code represent the Head Material, Seats & O-Rings, Ball Material and Connec-

tion Type. Using the above example, the code breaks down as follows:

P - Head Material, including fittings. In this example, the P represents GFPPL.

T - Seat & O-Ring Material. In this example, the T represents Teflon.

C - Types of Balls used in the valves. In this example, the C represents Ceramic.

1 - Connection type. In this example, the 1 represents tubing connections for 3/8” OD tubing.

The completed KOPkit number for the above example is:

K2PTC1

Note: If you do not find your connection size in the following selection guide, please consult the factory for accurate

pricing. Our philosophy with the PULSAtron product line is to make it as flexible as our customers need it to be.