Specifications
12
Series E PLUS
Key Features
Automatic Control, available with 4-20 mADC direct or external
pacing, with stop function.
Manual Control by on-line adjustable stroke rate and stroke length.
Auto-Off-Manual switch.
Highly Reliable timing circuit.
Circuit Protection against voltage and current upsets.
Panel Mounted Fuse.
Solenoid Protection by thermal overload with auto reset.
Water Resistant, for outdoor and indoor applications.
Indicator Lights, panel mounted.
Guided Ball Check Valve Systems, to reduce back flow and enhance
outstanding priming characteristics.
Safe & Easy Priming with durable leak-free bleed valve assembly
(standard).
Pressure and Flow Rate Capacity
LPK2 LPB2 LPA2 LPD3 LPB3 LPA3 LPK3 LPF4 LPD4 LPB4 LPH4 LPG4 LPE4 LPK5 LPH5 LPG5 LPH6 LPK7 LPH7 LPJ7 LPH8
Capacity GPH 0.13 0.21 0.25 0.5 0.50 0.50 0.60 0.85 0.90 1.00 1.70 1.75 1.85 2.50 3.15 4 5.00 8.00 10.00 10.00 25.00
nominal GPD 3 5 6 12 12 12 14 20 22 24 41 42 44 60 76 96 120 192 240 240 600
(max .) LPH 0.5 0.8 0.9 1.9 1.9 1.9 2.3 3.2 3.4 3.8 6.4 6.6 7 9.5 11.9 15.1 18.9 30.3 37.9 37.9 94.6
Pressure PSIG 300 250 150 250 150 100 100 250 150 100 250 150 100 150 150 100 100 50 35 80 30
(max.) BAR 2117101710 7 7 1710 7 1710 7 1010 7 73.32.45.52
Connections
Piping
1/4" FNPT 1/4" FNPT
1/2" FNPT
MODEL
Tubing
1/4" ID X 3/8" OD
3/8" ID X 1/2" OD
3/8" ID X 1/2" O
D
1/2" ID X 3/4" OD (LPH8 ONLY)
Electronic Metering Pumps
Engineering Data
Reproducibility:
+/- 2% at maximum capacity
Viscosity Max CPS :
For viscosity up to 3000 CPS, select connection size 3, 4, B or C with 316SS ball material.
Flow rate will determine connection/ball size. Greater than 3000 CPS require spring loaded
ball checks. See Selection Guide for proper connection.
Stroke Frequency Max SPM:
125
Stroke Frequency Turn-Down Ratio:
10:1
Stroke Length Turn-Down Ratio:
10:1
Power Input:
115 VAC/50-60 HZ/1 ph
230 VAC/50-60 HZ/1 ph
Average Current Draw:
@ 115 VAC; Amps:
1.0 Amps
@ 230 VAC; Amps:
0.5 Amps
Peak Input Power:
300 Watts
Average Input Power @ Max SPM:
130 Watts