Product List Effective 01/14/13 Metering Pumps and Control Systems
TABLE OF CONTENTS Important Information When Placing An Order Feature Selection Guide Model Selection Guide 3 4 5-9 PULSAtron - Electronic Metering Pumps Series MP Series E Plus Series HV Series E Series E-DC Series A Plus Series T7 Series C Plus Series C Series ET 10-11 12-13 14-15 16-17 18-19 20-21 22-23 24-25 26-27 28-29 Electronic Metering Pump Accessories KOPkits Suction/Discharge Valves Parts 30-31 32 33-35 OMNI - Mechanical Diaphragm Pumps Model Selection Accessories and KOPkits 36-38 39 C
IMPORTANT INFORMATION WHEN PLACING AN ORDER 1) Fax, mail or telephone orders directly to the Customer Service Department: Pulsafeeder Incorporated—A Unit of IDEX Corporation Standard Product Operations Main Office & Manufacturing Facility 27101 Airport Road, Punta Gorda, Florida, USA 33982-2462 E-Mail: pulsaspo.cs@idexcorp.com Telephone: 800-333-6677 or 941-575-3800 Fax: 800-456-4085 or 941-575-4085 www.pulsatron.
Feature Selection Guide Pulsafeeder offers one of the most flexible electronic metering pumps in the world. The product can be configured to meet a large variety of applications and needs. The next few pages will guide you in structuring a complete and correct model number. The first step in selecting the right model for your application is to select the correct Series. Each Series offers a variety of features that distinguish it from other Series.
Model Selection Guide Once you have selected the appropriate Series, you must configure the model so that it is built with the features you desire. The Configuration Guide associated with each Series will present the most popular selections. Select one code from each category to build up a complete model string.
Selection Guide cont’d. Selecting the Wet-End Code & Connection Type: Digits 7-10 in the string represent the wet-end code. It is the group of four digits set apart by the dash lines. LB02SA-PTC1 These four digits represent your wet-end code and connection type. The four digits in the wet-end code represent the Head Material, Seats & O-Rings, Ball Material and Connection type. Using the above example, the code breads down as follows: P - Head Material, including fittings.
Selecting the Connection Code: Selecting the proper connection code is probably the most difficult part of choosing a PULSAtron pump. Because of the flexibility built into this product line to meet a large variety of applications, the connection codes are determined by alot more factors than just the size of the tubing. Connection code is probably the wrong name for this selection because you are selecting more than just the tubing size. This code also determines the type of valves used in the pump.
Selection Guide cont’d. Suffix Code: LB02SA-PTC1-XXX Suffix Code The last three digits of the model string are referred to as the Suffix Code. It is through the suffix code that the pump can be customized with optional features or customer specific features, e.g. private labeling. If your company has specific features that will be ordered on every pump, contact customer service with a description of what you want customized.
520 = DG/5FV Five Function Valve with De-Gas With the DG/5FV you don’t have to give up the accuracy and control of a solenoid metering pump in order to pump gaseous solutions. Available in a variety of materials and popular sizes, the DG/5FV is ready to tackle most applications. Not only does the DG/5FV provide degassing, it is packed with features that increase safety, enhance performance and generally improves the convenience of operation.
Electronic Metering Pumps Series MP Key Features Automatic Control, Fully scalable 4-20mA current signal that can also be calibrated to precisely match the current signal reading of the sending device. Manual Control allows for a combined 1000:1 turndown resulting in accurate metering for critical applications. Flow Verification option is available on select sizes. Simple Prompts in plain language allow for easy-to-understand instructions for programming.
PULSAtron Series MP Selection Guide 0.13 gph / 0.21 gph / 0.50 gph / 0.85 gph / 1.70 gph / 0.25 gph / 0.50 gph / 0.90 gph / 1.75 gph / 2.50 gph / 3.15 gph / 0.50 gph / 0.60 gph / 1.00 gph / 1.85 gph / 5.00 gph / 8.00 gph / 10.0 gph / 21.
Electronic Metering Pumps Series E PLUS Key Features Automatic Control, available with 4-20 mADC direct or external pacing, with stop function. Manual Control by on-line adjustable stroke rate and stroke length. Safe & Easy Priming with durable leak-free bleed valve assembly (standard). Auto-Off-Manual switch. Highly Reliable timing circuit. Circuit Protection against voltage and current upsets. Panel Mounted Fuse.
PULSAtron Series E Plus Selection Guide 0.13 gph / 0.21 gph / 0.50 gph / 0.85 gph / 1.70 gph / 0.25 gph / 0.50 gph / 0.90 gph / 1.75 gph / 2.50 gph / 3.15 gph / 0.50 gph / 0.60 gph / 1.00 gph / 1.85 gph / 4.00 gph / 5.00 gph / 8.00 gph / 10.0 gph / 10.0 gph / 25.
Electronic Metering Pumps Series HV Key Features Automatic Control, available with 4-20 mADC direct or external pacing, with stop function. Manual Control by on-line adjustable stroke rate and stroke length. Viscosities to 20,000 CPS. Agency approved for demanding OUTDOOR and indoor applications. Auto-Off-Manual switch. Highly Reliable timing circuit. Circuit Protection against voltage and current upsets. Panel Mounted Fuse.
PULSAtron Series HV Selection Guide M OD ELS: B3 F4 G4 G5 H7 = = = = = 0.50 gph / 1.00 gph / 2.00 gph / 4.00 gph / 10.
Electronic Metering Pumps Series E Key Features Manual Control by on-line adjustable stroke rate and stroke length. Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics. Premium Standard Wetted Component Materials. Agency approved for demanding OUTDOOR and indoor applications. Highly Reliable timing circuit. Water Resistant excellent for OUTDOOR and indoor applications.
PULSAtron Series E Selection Guide K2 12 33 F4 H4 02 13 34 G4 K5 H5 03 K3 14 44 H6 K7 H7 J7 H8 = = = = = = = = = = = = = = = = = = = = C ON T R OLS: S = No Options Available ELEC T R I C AL: A 1 B 2 LI QU I D EN D M AT ER I ALS: Pump Head & Fittings/Seats & O-rings/Balls = = = = PH C = PT C = KT C = VH C = VT C = WTC = AT S = See page 6 f or addit ional LE_ _ S _ - _ _ _ _ - _ _ _ 0.13 gph / 3 gpd ( 0.5 lph) max pres.: 300 PSI (21 BAR) 0.21 gph 5 gpd ( 0.8 lph) max pres.: 250 PSI (17 BAR) 0.
Electronic Metering Pumps Series E-DC Key Features Powered by 12 Volt DC.. Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics. Premium Standard Wetted Component Materials. Manual Control by on-line adjustable stroke rate and stroke length. Agency approved for demanding OUTDOOR and indoor applications. Highly Reliable timing circuit. Water Resistant excellent for OUTDOOR and indoor applications.
PULSAtron Series E-DC Selection Guide MODELS: 02 13 14 44 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR) = 0.50 gph / 12 gpd ( 1.9 lph) max pres.: 150 PSI (10 BAR) = 1.00 gph / 24 gpd ( 3.8 lph) max pres.: 100 PSI (7 BAR) = 1.85 gph / 44 gpd ( 7.0 lph) max pres.
Electronic Metering Pumps Series A PLUS Key Features Manual Control by on-line adjustable stroke rate and stroke length. Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics. Premium Standard Wetted Component Materials. Agency approved for demanding OUTDOOR and indoor applications. Highly Reliable timing circuit. Water Resistant excellent for OUTDOOR and indoor applications.
Pulsatron Series A Plus Selection Guide LB _ _ _ _ - _ _ _ - _ _ Models Produc t C ode S2 S3 S4 C2 C3 02 03 04 64 C4 F low R at e GPD 12 33 58 6 10 6 12 24 30 48 GPH 0.50 1.38 2.42 0.25 0.42 0.25 0.50 1.00 1.25 2.00 LPH 1.9 5.2 9.1 0.9 1.6 0.9 1.9 3.8 4.7 7.6 Pres s ure 1 R at ing PSI BAR 250 17 150 10 100 7 250 17 150 10 100 7 50 3.3 St rok e R at e (SPM ) 250 St andard Valv e Siz e J (TFE Only) M ax .
Electronic Metering Pumps with Integrated Controller Series T7 Feed Control with 7 Day Timer The Series T7 was designed to feed chemical products on a timed schedule. Typical applications include the feed of biocides in open-air cooling towers. The feed cycle is initiated and controlled by the programmable timer. The Series T7 provides everything you need in one unique, compact package to create a simple and cost effective metering system for timed applications.
PULSAtron Series T7 Selection Guide MODELS: 13 14 64 44 = 0.50 gph / 12 gpd (1.9 lph) = 1.00 gph / 24 gpd (3.8 lph) = 1.25 gph / 30 gpd (4.7 lph) = 2.00 gph / 48 gpd (7.6 lph) CONTROLS: B = No Options Available ELECTRICAL: A 1 B 2 = = = = max max max max LC_ _ B _ - ___ _ - ___ pres.: 100 PSI (7 BAR) pres.: 100 PSI (7 BAR) pres.: 100 PSI (7 BAR) pres.: 50 PSI (3.3 BAR) 115 Volt / 50-60Hz 115 Volt / 50-60Hz (w ithout agency approvals) 230 Volt / 50-60Hz / 1ph w ith 6' (1.
Electronic Metering Pumps Series C PLUS Key Features Manual Control by on-line adjustable stroke rate and stroke length. Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics. Premium Standard Wetted Component Materials. Agency approved for demanding OUTDOOR and indoor applications. Highly Reliable timing circuit. Water Resistant excellent for OUTDOOR and indoor applications.
PULSAtron Series C Plus Selection Guide MODELS: 02 03 04 54 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 80 PSI (5.6 BAR) = 0.50 gph / 12 gpd (1.9 lph) max pres.: 80 PSI (5.6 BAR) = 1.00 gph / 24 gpd (3.8 lph) max pres.: 80 PSI (5.6 BAR) = 1.25 gph / 30 gpd (4.7 lph) max pres.: 80 PSI (5.
Electronic Metering Pumps Series C Key Features Automatic Control by external pacing with prime switch (optional). Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics. Premium Standard Wetted Component Materials. Manual Control by on-line adjustable stroke length (fixed stroke rate). Liquid Low Level Option available to prevent loss of prime. Agency approved for demanding OUTDOOR and indoor applications.
PULSAtron Series C Selection Guide MODELS: 02 03 04 54 = 0.25 gph / 6 gpd (0.9 lph) max pres.: 80 PSI (5.6 BAR) = 0.50 gph / 12 gpd (1.9 lph) max pres.: 80 PSI (5.6 BAR) = 1.00 gph / 24 gpd (3.8 lph) max pres.: 80 PSI (5.6 BAR) = 1.25 gph / 30 gpd (4.7 lph) max pres.: 80 PSI (5.
Electronic Metering Pumps with Integrated Controller Series ET Feed Control with Water Meter Input The Series ET was designed to feed chemical in response to a water meter input. Typical applications include inhibitor feed for an open air-cooling tower. The Series ET provides everything you need in one unique, compact package to create a simple and cost effective metering system. Principal of Operation The Series ET counts pulses from a water meter.
PULSAtron Series ET Selection Guide LT_ _ MODELS: B2 F4 H4 A2 B3 D4 G4 H5 A3 B4 E4 H6 H7 H8 = 0.21 gph / 5 gpd (0.8 lph) max pres.: 250 PSI (17 BAR) = 0.85 gph / 20 gpd (3.2 lph) max pres.: 250 PSI (17 BAR) = 1.70 gph / 41 gpd (6.4 lph) max pres.: 250 PSI (17 BAR) = 0.25 gph / 6 gpd (0.9 lph) max pres.: 150 PSI (10 BAR) = 0.50 gph / 12 gpd (1.9 lph) max pres.: 150 PSI (10 BAR) = 0.90 gph / 22 gpd (3.4 lph) max pres.: 150 PSI (10 BAR) = 1.75 gph / 42 gpd (6.6 lph) max pres.: 150 PSI (10 BAR) = 3.
KOPkits Selecting a KOPkit: All KOPkit model strings begin with the letter K. The remainder of the string can be determined by knowing your pump model. When you select your KOPkit, you will need to build the model number based on the pump model string that you purchased. The two pieces of information you need are the head size and the wet-end code, which is part of the model string of the pump. The pump head size is the fourth digit in the pump model number.
PULSAtron KOPkit Selection Guide K_ = = = = = = HEAD SIZE The digits 2-8 follow ing the K represents the pump head size. This is represented by the fourth digit in the pump model string.
Suction/Discharge Valves Suction/Discharge Valve Selection Guide VALVE TYPE: 101 = Suction Valve 201 = Discharge Valve SEATS: H V T = CSPE = Viton = TFE BALLS: T C S H = TFE = Ceramic = 316 Stainless Steel = Alloy C (Hastelloy) CONNECTION TYPE: 1 2 3 4 5* 6 7* 8 A B* C D E F G I J K* L M N P Q R S U V* W Y X = Double Balls w hen TFE seats selected = Double Balls w hen TFE seats selected = Double Balls w hen TFE seats selected = Double Balls w hen TFE seats selected = Available for Discharge On
LIQUID END COMPONENTS tem Description No. Part No. 1 L0200200-316 HEAD, PUMP .750 1 L0200200-FPPHEAD, PUMP .750 1 L0200900-FPPHEAD, PUMP HSA #2 HEAD J .750 1 L0200900-PVCHEAD, PUMP HSA #2 HEAD J .750 1 L0200200-PVDHEAD, PUMP HSA #2 HEAD J .750 1 L0200300-316 HEAD, PUMP 1.000 1 L0200300-FPPHEAD, PUMP 1.000 1 L0202500-HPVHEAD, PUMP 1.000 1 L0200300-PVDHEAD, PUMP 1.000 1 L0200300-PVCHEAD, PUMP 1.000 1 L0201000-FPPHEAD, PUMP HSA #3 HEAD J 1.000 1 L0201000-PVCHEAD, PUMP HSA #3 HEAD J 1.
DRIVE END COMPONENTS tem No. Part No.
BLEED VALVE ASSEMBLIES Item No. Part No.
Mechanical Diaphragm Pumps OMNI mechanical metering pumps and controllers are the economical standard for a reliable chemical feed pump with virtually no maintenance. For high technology in a simple to understand package an an economical price, add an MPC (metering pump controller) to the OMNI pump to take advantage of complete system integration between metering pump and process.
OMNI DC2 thru DC6 Selection Guide DC_ _ _ _ _ - _ _ _ = PVDF - 7.0 GPH (26.4 LPH)@60Hz & MPC or 5.8 GPH (22.0 LPH)@50Hz 2A = 316SS - 7.0 GPH (26.4 LPH)@60Hz & MPC or 5.8 GPH (22.0 LPH)@50Hz 2A = PVDF - 13.9 GPH (52.8 LPH)@60Hz & MPC or 11.6 GPH (44.0 LPH)@50Hz 2B = 316SS - 13.9 GPH (52.8 LPH)@60Hz & MPC or 11.6 GPH (44.0 LPH)@50Hz 2B = PVDF - 24.0 GPH (90.8 LPH)@60Hz & MPC or 20 GPH (75.7 LPH)@50Hz 2C = 316SS - 24.0 GPH (90.8 LPH)@60Hz & MPC or 20 GPH (75.7 LPH)@50Hz 2C = PVDF - 32.3 GPH (122.
Mechanical Diaphragm Pumps OMNI DC7 Series Selection Guide DC7_ 7C = PP - 412 GPH (1560 LPH)@60Hz & MPC or 343.4 GPH (1300 LPH)@50Hz 7C = PVDF2 - 412 GPH (1560 LPH)@60Hz & MPC or 343.
Mechanical Diaphragm Pumps Common Pump Accessories - Omni & Others C om ponent D rip C ov er, M ot or Siz e Pres s ure R elief Valv es Bac k Pres s ure Valv es Gauge I s olat or w / 200PSI Gauge C alibrat ion C olum n Y St rainer 56C 1/2" 1/2" 1/2" 1" 1" 1" 1.5" 1.5" 1/2" 1/2" 1/2" 1" 1" 1" 1.5" 1.
Peristaltic Pumps Series XP The Chem-Tech XP Series with peristaltic technology delivers worry-free dosing in a modern design. Each and every component of the XP Series is designed and manufactured for optimum riability and durability for REAL Performance. The electronic timing circuit in the adjustable ‘A’ Models provides reliable pump control, without relying on mechanical adjustment components that wear out over time.
Peristaltic Pumps Series XPV The Chem-Tech XPV Series pump combines the best in variable speed peristaltic pump technology with state of the art control electronics, providing you with unparalleled performance, control and value. The XPV represents the leading edge of microprocessor performance management, giving you many choices of input signal types, and onboard timer programs to customize this pump to any application.
XP & XPV Series Parts Schedule Part Number Description Part Number KOPkits - Low Pressure NCKA2LPAP1 KOPkit XP - 004 / 007 / 008 NCKA3LPAP1 KOPkit XP - 009 / 015 / 017 NCKA4LPAP1 KOPkit XP - 023 / 033 / 014 NCKA6LPAP1 KOPkit XP - 030 / 050 / 055 NCKA8LPAP1 KOPkit XP - 048 / 080 / 100 KOPkits - High Pressure NCKA2HPAP1 KOPkit XP - 004 / 007 / 008 NCKA3HPAP1 KOPkit XP - 009 / 015 / 017 NCKA4HPAP1 KOPkit XP - 023 / 033 / 014 NCKA6HPAP1 KOPkit XP - 030 / 055 NCKA24PAP1 KOPkit XP - 004 / 008 - 3/8" NCKA44
Mechanical Diaphragm Pumps Prime Performance The Chem-Tech Prime Performance Series pumps have a specially designed degassing valve system for applications using off-gasing chemicals like sodium hypochlorite. Built upon motorized-diaphragm technology, the Prime Performance Series delivers dependable performance, extended longevity and consistent metering over long periods of time in a compact form.
Mechanical Diaphragm Pumps Series 100, 150, 200 Series 100 Models - The preferred metering pump for water conditioning professionals around the world. Perfect for applications where economical, consistent performance is required. Capable of a wide range of flows, from less than 3 USgpd up to 30 USgpd and pressures up to 100 psig. Series 150 Models - Built upon the same solid platform as the 100 Models, these units are capable of higher flowrates.
Mechanical Diaphragm Pumps Series 100D and 150D Offering the same features as the Series 100 and 150 Models but configured as duplex units capable of dosing 2 chemicals at different rates. Note: Standard Features do not add to the pump price. Remember that liquid end adders must be doubled for duplex pump models. Standard Agency Listings Model ETL ETLsan All 60Hz X X 100-150 50Hz 200 50Hz Contact factory for alternate listings Contact factory for applicable agency approvals.
KOPkits Chem-Tech KOPkit Selection Guide KX100 - _ _ _ PRODUCT DESIGNATOR: KX100 = Chem-Tech Kopkit LIQUID END MATERIALS: Head, Diaph.
Series 100, 150, 100D, 150D And 200 Parts Schedule Part Num ber J30514 J30515 J30517 J30518 J30519 L3300V03-FPP J30522 31081 31082 31083 32520 32521 32522 32523 32524 32525 32526 32527 32528 32529 32530 32531 32532 32533 32535 J34379 34405 34423 34532 J37073 37080 37081 37083 37088 37089 37300 J37440 J37442 37886 38080 38980 38981 38984 J38985 J60717 J60729 J60718 J60730 J41540 41541 41543 41544 J41548 J41834 41551 J41835 Description Kit, Bleed, Valve, FPP/TFE/ 3/8 Kit, Bleed, Valve, PVC/HPY/ 1/2 Kit, B
Mechanical Diaphragm Pumps Series 250 The Series 250 is a mechanically activated, heavy duty diaphragm feed pump that provide excellent efficiency under strenuous conditions. The Series 250 combines the power and repeatability of piston pumps with the chemical resistance of diaphragm pumps for high pressure applications. Chem-Tech Series 250 Selection Guide MODELS: 3 4 ELECTRICAL: XD XL = 115V, 50/60 Hz, T.E.F.C. = 230V, 50/60 Hz, T.E.F.C.
DIAPHRAGM PUMPS STINGRAY Series 100 & 200 Versatility: range of models, offering feed rates from 8 GPD to 90 GPD, and operating pressures up to 100 PSI Durability: rugged, chemical-resistant plastic casing, and corrosion-resistant rubber and plastic solution handling components Long Life: PTFE coated diaphragm and viton seals, for long life even in highly corrosive applications Reliability: spring-loaded check valves for high reliability.
KOPkits Mec-O-Matic STINGRAY KOPkit Selection Guide KUSR_ - BCA K = Series 100 = Series 200 PRODUCT DESIGNATOR: 1 2 LIQUID END MATERIALS: Head, Diaph., Seats & Balls BCA = PVC / Viton / Ceramic CONNECTION : K = Tubing .38" PVC Suction / .38" PE Discharge STINGRAY Series Parts Schedule Part No.
PERISTALTIC PUMPS Dolphin Series Exclusive quick-release, twist-off, clear polycarbonate, acid-resistant head to withstand the harshest environment. Self-lubricating chemical resistant roller assembly. Durable, long lasting tubing with no tube adjustment. Rugged and dependable – Heavy-duty shaded pole gearmotor with lifetime lubrication. Flexibility in feed rates - from .13 gallons to 97 gallons per Contact factory for applicable agency approvals. day ...
PERISTALTIC PUMPS VSP Series Versatile - The VSP is engineered to dispense low volumes of chemicals at exacting amounts. Reliable – Heavy-duty gearmotor... fieldtested, proven peristaltic head... durable chemical-resistant housing. Low Maintenance – Self-lubricating roller assembly... NO tube adjustment required... exclusive quick-release, twist-off head. Guaranteed – Full one year warranty on dispenser.
PERISTALTIC PUMPS Series 2400T Grease Trap Dispenser Capable of Dispensing Low Volumes Programmable Simple Installation Prime Push Button for Quick Start-Up Quick Release Twist Off Head Built-In Timer No Tube Adjustment Needed Self Lubricating Roller Assembly Contact factory for applicable agency approvals.
Policies and Procedures 1. 2. 3. 4. Manufacturer’s Equipment Warranty a. Pulsafeeder warrants all pumps and controllers of its manufacture to be free of defects in material or workmanship. Liability under this policy extends for 24 months from date of shipment from the factory. The manufacturer’s liability is limited to repair or replacement of any failed equipment or part which is proven defective in material or workmanship upon manufacturer’s examination.
Policies and Procedures continued 5. Credit for Return of New, Unused Equipment a. No equipment will be accepted beyond six months after date of shipment from factory for credit. b. Only new, unused and undamaged standard equipment will be accepted for return to stock. c. All credits are based on evaluation and acceptance of material as new and unused by Pulsafeeder. You will be requested to acknowledge the condition of the product being returned on our packing list.
Terms & Conditions 1 . AGREEMENT. The contract of sale resulting from Seller’s documentation together with these terms and conditions (“Contract”) constitutes the entire agreement between the parties hereto, except as modified in writing signed by both the Seller and Purchaser. The Seller is Pulsafeeder, Inc. and the Purchaser is identified in the Contract.
NOTES
NOTES
NOTES
PLP001 F13
