Troubleshooting guide

14
6.6 Factory Re-Initialization
Factory Re-initialization is typically not required. When re-initializing your MPC, all of the system
settings and calibration information will be overwritten by the original factory default settings. The
controller must be re-configured and re-calibrated to your specifications.
A Factory Re-initialization should be performed only if there is reason to believe that the internal MPC
memory has become corrupted. The condition usually manifests itself with inconsistent or erratic
operation – often associated with meaningless characters on the display, or exaggerated numerical
values.
Factory Re-Initialization:
1. Press the MENU key to access the System Setup Menu
-MENU-
CALIBRATION
2. Press the UP arrow key to display
-MENU-
SYSTEM SETUP
3. Press the ENTER key
SYSTEM SETUP
SECURITY
4. Press the UP arrow key twice to display
SYSTEM SETUP
FACTORY INIT
5. Press the ENTER key
PRESS ENTER
TO FACTORY INIT
6. Press the ENTER key
ARE YOU SURE?
YES=ENTER NO=MENU
7. Pres the ENTER key
RESETTING PUMP
TO FACTORY INIT