Use Instructions

The Pulsa PI001 Wireless Industrial Weight Sensor is a heavy duty, high accuracy sensor built to measure heavy consumable
inventory in harsh environments. With a standard measurement range of 1500 lbs, a safe overload rating of 4000 lbs and an optional
loading ramp, the PI001 can accommodate many uses. The sensor hardware is suitable for outdoor use and includes a water proof
electronics enclosure and a highly durable powder coated finish on the steel components. The sensor measurement values are
broadcast wirelessly to the Pulsa Gateway. Sensor data and setup is available through Pulsa iOS, Android, and web applications.
Applications:
• Liquid tanks: monitor liquid tank levels by installing under tank
• Other heavy consumables: pallets, IBC totes, welding wire, food & beverage bins, chemical drums, bulk materials, etc.
• Near real-time weight sensor
1. Plug Pulsa gateway into power source and position within
350 feet of weight sensor
2. Ensure that the Pulsa gateway has direct line of sight with
the weight sensor electronics module.
3. Download Pulsa mobile app (iOS & Android) or log into
web app at dashboard.pulsasensors.com
4. Follow sensor and consumable set up in app
Performance Details
Use Instructions
FCC Granted
CE Granted
UL HazLoc Pending
IC Granted
Certifications
724 Brannan St., San Francisco, CA 94103
Website: pulsasensors.com Tel: [phone] Email: [e-mail]
PI001 Wireless Weight Sensor Specifications
Measurement range
0 to 1500lbs
1
Safe overload
4000 lbs
Weight accuracy
±1.00% FS
Non-linearity
±0.03% FS
Hysteresis
±0.03% FS
Repeatability
±0.03% FS
Creep
±0.02% FS / 30 Min
Operating temperature
-10 to 55℃ (14 to 131℉)
Dimensions
24 (L) x 24 (W) x 3 (H) inches
2
36 (L) x 36 (W) x 3 (H) inches
3
Loading ramp
Optional
Platform weight
65lbs
2
95lbs
3
Measurement frequency
3 minutes
Battery life
5-7 yrs
4
Battery
Replaceable 3.6V
Low battery warning
Yes, app notification
Platform material
Powder coated steel
Signal transmission range
0 to 350ft (0 to 100m)
Notes:
1. Higher weight ranges available
2. 2’ x 2’ platform option
3. 3’ x 3’ platform option
4. Battery life is based on 2 measurements every 3 minutes
PI001 Industrial Weight Sensor Data Sheet
Industrial Weight Sensor
Industrial Weight Sensor with Optional Ramp
Last update: 11/20/2019
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.