Data Sheet
ZM11.SIDE, ZM12.SIDE
ZM13.SIDE, ZM14.SIDE, ZM15.SIDE
Side Mounting Bracket
Oct. 2007 / Rev. 1.2 DS-ZMXX.SIDE-EN / All parameters are specified at 25°C ambient unless otherwise noted.
The information presented in this document is believed to be accurate and reliable and may change without notice.
www.pulspower.com Phone +49 89 9278 0 Germany
1/1
1. GENERAL DESCRIPTION
BRACKET FOR FLAT MOUNTING
This accessory is used to mount Dimension power
supplies and other Dimension units sideways to reduce
the installation depth. The two aluminum brackets and
the black plastic slide must be removed from the units,
to allow mounting of the zinc-plated steel bracket.
Two mounting options are possible:
■ Panel Mount
■ 35mm DIN-Rail Mount
2. DIMENSIONS AND INSTALLATION DATA
The drawings on the left show the bracket for DIN-
rail mounting. The total installation depth is the B
dimension plus 6mm plus the height of the DIN-Rail.
In case the unit is panel mounted, the B dimension
shows the required installation depth.
Power
Supply
Use
Bracket
A B C Length Width Height
Bracket
Weight
QS3.XXX
ZM11.SIDE
89mm 38mm 32mm
145mm 65mm 37mm 140g
QS5.XXX
ZM12.SIDE
104mm 46mm 40mm
145mm 65mm 44mm 160g
QS10.XXX
ZM13.SIDE
104mm 66mm 60mm
145mm 65mm 63mm 180g
QT20.XXX
ZM14.SIDE
124mm 71mm 65mm
145mm 65mm 76mm 195g
QS20.XXX
ZM15.SIDE
124mm 88mm 82mm
145mm 65mm 84.5mm 205g
YR2.DIODE
ZM11.SIDE
89mm 38mm 32mm
145mm 65mm 37mm 140g
YRM2.DIODE
ZM11.SIDE
104mm 38mm 32mm
145mm 65mm 37mm 140g
UF20.XXX
ZM14.SIDE
89mm 79mm 64mm
145mm 65mm 76mm 195g
CS3.XXX
ZM11.SIDE
89mm 38mm 32mm
145mm 65mm 37mm 140g
CS5.XXX
ZM11.SIDE
104mm 38mm 32mm
145mm 65mm 37mm 140g
CS10.XXX
ZM13.SIDE
104mm 66mm 60mm
145mm 65mm 63mm 180g