Instructions

ZM1.UBC10 Installation Manual
Installation Instructions
1) Put the unit backwards on a flat surface and remove the fuse before working on the unit.
2) Loosen the captive cover screw.
3) Open the battery compartment.
4) Remove the battery without disconnecting the connection wires.
5) Put the wall mount bracket behind the unit.
6) Screw the four screws and the four spring-lock washers, which were delivered with the mounting bracket, into the shown areas. Tightening
torque: 3 Nm (27 lb inch)
7) Return the battery into the housing, close the battery compartment and insert the fuse again.
Installation Instructions