Data Sheet

ZM1.UBC10

WALL/PANEL MOUNTING BRACKET FOR UBC10 UNIT

DC-UPS

WALL MOUNTING BRACKET

This accessory is used to mount the DC-UPS UBC10 units

on a wall or on a panel without using a DIN-Rail.

The bracket can be directly mounted without removing

the aluminium brackets and the black plastic slide of the

DC-UPS. The total installation depth will increase to

126mm.

PHYSICAL DIMENSIONS AND WEIGHT

Dimensions 123 x 156 x 13mm / 4.84’’ x 6.14’’ x 0.51’’ (WxHxD)

Weight 340g / 0.75lb

ORDER NUMBER

ZM1.UBC10 The order number consists of a set with one mounting bracket, four mounting screws (M5x8) and

four 5mm spring-lock washers.

Jan. 2010 / Rev. 1.0 DS-ZM1.UBC10-EN

All parameters are specified at 25°C ambient unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0 Germany

1/2

PAGE 1
ZM1.UBC10 WALL/PANEL MOUNTING BRACKET FOR UBC10 UNIT DC-UPS WALL MOUNTING BRACKET This accessory is used to mount the DC-UPS UBC10 units on a wall or on a panel without using a DIN-Rail. The bracket can be directly mounted without removing the aluminium brackets and the black plastic slide of the DC-UPS. The total installation depth will increase to 126mm. PHYSICAL DIMENSIONS AND WEIGHT Dimensions 123 x 156 x 13mm / 4.84’’ x 6.14’’ x 0.51’’ (WxHxD) Weight 340g / 0.75lb ORDER NUMBER ZM1.
PAGE 2
ZM1.UBC10 WALL/PANEL MOUNTING BRACKET FOR UBC10 UNIT ASSEMBLY AND MOUNTING INSTRUCTION Step Step Step Step Step Step 1: 2: 3: 4: 5: 6: Step 7: Put the unit backwards on a flat surface and remove the fuse before working on the unit. Loosen the captive cover screw. Open the battery compartment. Remove the battery without disconnecting the connection wires. Put the ZM1.UBC10 bracket behind the unit.