Datasheet

YR20.242
Y-Series
12-28V, 20A, DUAL REDUNDANCY MODULE
17. ACCESSORIES
17.1. ZM11.SIDE - SIDE MOUNTING BRACKET
This bracket is used to mount the YR20.242 redundancy module sideways with or without utilizing a DIN-Rail.
The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can
be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
Fig. 17-1
Side mounting without DIN-
rail brackets
Fig. 17-2
Side mounting with DIN-rail
brackets
Fig. 17-3
Mounting Dimensions
Side mounting bracket
Jul. 2017 / Rev. 1.3 DS-YR20.242-EN All parameters are typical values specified at 24V, 20A output current, 25°C ambient and
after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
13/17