Data Sheet

UZB12.051
U-Series
BATTERY REPLACEMENT 12V, 5AH
9. ENVIRONMENT
Operational temperature
*)
-10°C to +40°C (14°F to 104°F) For charging
Frequently charging below +5°C (41°F) reduced
the lifetime of the battery
-15°C to +50°C (5°F to 122°F) For discharging
Storage temperature
-20°C to +50°C (-4°F to 122°F) For storage and transportation
Recommendation:
Do not store at temperatures higher than 25°C
or performance and lifetime may change.
Humidity 5 to 95% r.h. IEC 60068-2-30
Do not energize while condensation is present
Vibration sinusoidal ±4mm at 16.7Hz
fixed frequency for 1hour
Vibration in vertical mounting orientation
according to IEC/EN 61056-1
Shock free fall from 20cm
onto a wooden floor
Shock with bottom down orientation
according to IEC/EN 61056-1
Altitude 0 to 6000m (0 to 20 000ft)
Degree of pollution 2 According to IEC 62477-1, not conductive
*) Operational temperature is the same as the ambient temperature and is defined as the air temperature 2cm below the unit.
10. FULFILLED STANDARDS
UL 1989 Component recognition - Stand-by batteries
UL Category BAZR2
RoHS Directive
Batteries are exempt from the directive 2011/65/EU of the
European Parliament and the Council of June 8
th
, 2011 on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment.
REACH Directive
Directive 1907/2006/EU of the European Parliament and the
Council of June 1
st
, 2007 regarding the Registration,
Evaluation, Authorisation and Restriction of Chemicals
(REACH)
IEC 61056
IEC
General purpose lead-acid batteries (valve-regulated types)
Aug. 2017 / Rev. 1.0 DS-UZB12.051
All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted.
www.pulspower.com Phone [phone] Germany
4/6