Data Sheet

ManualsBrandsPULS ManualsTest & Measurement AccessoriesUZB12.051

Table Of Contents

UZB12.051

U-Series

BATTERY REPLACEMENT 12V, 5AH

ATTERY REPLACEMENT

 Maintenance-free VRLA Lead-Acid Battery

 AGM (Absorbent Glass Mat) Technology

 Can Be Installed in Any Orientation Except Permanently

Inverted

 High-current Type

1. GENERAL DESCRIPTION

1/6

The UZB12.051 is a non-spillable maintenance-free VRLA

lead-acid battery with absorbent glass mat (AGM)

technology. It can be used as a battery replacement for

many DC-UPS battery modules.

2. SHORT-FORM DATA

Nominal voltage DC 12V

Nominal battery

capacity

5Ah Capacity class

Nominal battery life 3 to 5 years According EUROBAT

Battery current Max. 35A Discharging current

Max. 1.8A Charging current

Recommended

charging voltage

13.9V

13.75V

13.6V

13.45V

At 10°C

At 20°C

At 30°C

At 40°C

Self-discharge rate 3%/month At 20°C

Temperature range -10°C to +40°C For charging

-15°C to +50°C For discharging

Connection terminal Faston 250

6.35x0.8mm

Size (WxHxD) 90x106x70mm

Weight 2100g / 4.63lb

3. ORDER NUMBERS

Battery Replacement UZB12.051

4. MARKINGS

Aug. 2017 / Rev. 1.0 DS-UZB12.051

All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0 Germany

Summary of content (6 pages)

PAGE 1
UZB12.051 BATTERY REPLACEMENT 12V, 5AH U-Series BATTERY REPLACEMENT Maintenance-free VRLA Lead-Acid Battery AGM (Absorbent Glass Mat) Technology Can Be Installed in Any Orientation Except Permanently Inverted High-current Type 1. GENERAL DESCRIPTION 2. SHORT-FORM DATA The UZB12.051 is a non-spillable maintenance-free VRLA lead-acid battery with absorbent glass mat (AGM) technology. It can be used as a battery replacement for many DC-UPS battery modules.
PAGE 2
UZB12.051 BATTERY REPLACEMENT 12V, 5AH U-Series INDEX Page 1. 2. 3. 4. 5. 6. 7. General Description ............................................1 Short-form Data ..................................................1 Order Numbers....................................................1 Markings ..............................................................1 Intended Use .......................................................3 Instructions for Disposal of the Batteries...........
PAGE 3
UZB12.051 BATTERY REPLACEMENT 12V, 5AH U-Series 5. INTENDED USE The battery is intended to be a replacement part for various DC-UPS battery modules. 6. INSTRUCTIONS FOR DISPOSAL OF THE BATTERIES Batteries must be completely discharged before replacement and can be returned to the supplier of the battery module or the battery manufacturer for disposal. Always dispose batteries through a recycling organization. 7.
PAGE 4
UZB12.051 BATTERY REPLACEMENT 12V, 5AH U-Series 9. ENVIRONMENT Operational temperature *) -10°C to +40°C (14°F to 104°F) Storage temperature -15°C to +50°C (5°F to 122°F) -20°C to +50°C (-4°F to 122°F) Humidity 5 to 95% r.h. Vibration sinusoidal ±4mm at 16.
PAGE 5
UZB12.051 BATTERY REPLACEMENT 12V, 5AH U-Series 11. PHYSICAL DIMENSIONS AND WEIGHT Width Height Height Depth Weight 90mm / 3.54’’ 102mm / 4.02’’ 106mm / 4.17’’ 70mm / 2.76’’ 2100g / 4.63lb Container height With battery poles Fig. 11-1 Isometric view All dimensions in mm Aug. 2017 / Rev. 1.0 DS-UZB12.051 All parameters are typical values specified at, 25°C ambient temperature unless otherwise noted. www.pulspower.
PAGE 6
UZB12.051 BATTERY REPLACEMENT 12V, 5AH U-Series 12. RECOMMENDATIONS FOR A LONG BATTERY LIFE Temperature: The temperature has the most impact on the service life. The hotter the temperature, the earlier the wear-out phase of the battery begins. The wear-out results in a degradation of battery capacity. Place the battery module in a cool location, e.g. near the bottom of the control cabinet. Do not place the battery module near heat generating devices. Do not overcharge batteries! Fig.