Data Sheet

UB20.241
UB-Series
24V, 20A, DC-UPS
22. ACCESSORIES
22.1. ZM2.WALL – WALL-MOUNTING BRACKET
This bracket is used to mount the DC-UPS onto a flat surface without utilizing a DIN-rail.
22.2. ZM12.SIDE – WALL-MOUNTING BRACKET
This bracket is used to mount DC-UPS sideways with or without utilizing a DIN-rail. The two aluminum brackets and
the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
Side mounting with DIN-rail brackets Side mounting without DIN-rail brackets
22.3. UZS24.100 – SENSOR BOARD FOR DC-UPS
The UZS24.100 enables all the benefits of the PULS 1-Battery
Concept when using individual batteries and not one of the
UZK24 battery modules. This sensor board makes the use of
matched batteries unnecessary and allows a precise battery
charging and testing resulting in the longest possible battery
life. The sensor board contains a PT1000 temperature sensor
and an auto-resettable fuse which is suitable for charging currents up to 3.5A. The fuse protects the center-tap wire
between the battery module and the DC-UPS control unit.
-
Feb. 2016 / Rev. 2.1 DS-UB20.241-EN
All parameters are specified at 24V, 20A output current, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
24/31