Datasheet

QTD20.241
Q-Series
24V, 20A, DC INPUT
Mar 2012 / Rev. 1.2 DS-QTD20.241-EN
All parameters are specified at 24V, 20A, 600Vdc input, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
11/22
15. EMC
The power supply is suitable for applications in industrial environments without any restrictions. The CE mark is in
conformance with EMC guideline 89/336/EEC and 93/68/EEC and the low-voltage directive (LVD) 73/23/EEC. A detailed
EMC Report is available upon request
EMC Immunity
EN 61000-6-1, EN 61000-6-2, EN-61800-3
Generic and product standards
Electrostatic discharge EN 61000-4-2 Contact discharge
Air discharge
8kV
15kV
Criterion A
Criterion A
Electromagnetic RF field EN 61000-4-3 80MHz-1GHz 10V/m Criterion A
Fast transients (Burst) EN 61000-4-4 Input lines
Output lines
2kV
2kV
Criterion A
Criterion A
Surge voltage on input EN 61000-4-5 + Æ - 1000V Criterion A
Surge voltage on input EN 61000-4-5 + Æ PE, - Æ PE 4kV Criterion A
Surge voltage on output EN 61000-4-5 + Æ -
+ / - Æ PE
500V
500V
Criterion A
Criterion A
Conducted disturbance EN 61000-4-6 0.15-80MHz 10V Criterion A
Criteria:
A: Power supply shows normal operation behavior within the defined limits.
EMC Emission
EN 61000-6-4, EN-61800-3 Generic and product standards
Conducted emission EN 55011, EN 55022 N/A
*)
Radiated emission EN 55011, EN 55022 Class A
*) There are no mandatory requirements in the generic standard EN 61000-6-4 for conducted emission on DC lines (input and
output). For the assessment of the conducted emission, the input filter of the frequency converter or servo amplifier need to be
taken into account.
Switching Frequencies
The power supply has three converters with three different switching frequencies
included. One is nearly constant. The other two are input voltage and load dependent.
Switching frequency 1 100kHz Nearly constant
Switching frequency 2 30kHz to 90kHz Input voltage and load dependent
Switching frequency 3 17kHz to 120kHz Input voltage and load dependent