Certificates

EU Declaration of Conformity
We declare hereby, that all power supplies listed below, are in conformity with the provisions
of the following European Directives:
2014/30/EU Electromagnetic Compatibility Directive
2014/35/EU Low Voltage Directive
2011/65/EU Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment (RoHS), amended with 2015/863/EU
Model Model
ML15.051 ML50.111
ML15.121 ML60.241
ML15.241 ML60.242
ML30.100 ML60.121
ML30.101 ML60.122
ML30.102 ML70.100
ML30.106 ML90.200
ML30.241 ML95.100
ML50.100 ML100.100
ML50.101 ML100.102
ML50.102 ML100.105
ML50.105 ML100.109
ML50.109 ML100.200
The following standards were used to assess the products:
EN 61000-6-3:2007 +A1:2011/AC:2012
Generic emission standard for residential environments
EN 61000-6-4:2007 +A1:2011 Generic emission standard for industrial environments
EN 61000-6-2:2005/AC:2005 Generic immunity standard for industrial environments
EN 61000-6-1:2007 Generic immunity standard for residential environments
EN 60950-1:2006+A11:2009 +A1:2010 +A12:2011 +AC:2011 +A2:2013
Information technology equipment - Safety – Part 1: General requirements
EN 50581:2012 Technical documentation for the assessment of electrical and electronic products
with respect to the restriction of hazardous substances
This declaration of conformity is issued under the sole responsibility of the manufacturer
PULS GmbH
Elektrastr. 6
81925 München
Germany
Munich, 2019-02-26
This is the internet version of the EU Declaration of Conformity which bears no signature but is identical to the signed doc-
ument. If a copy of a declaration with an actual signature should be needed, please contact your local PULS sales office.
Bernhard Erdl , Managing Director
No. G 322 19