Datasheet
Table Of Contents
- 1. Intended Use
- 2. Installation Requirements
- 3. Input Voltage
- 4. Soft-start and Input Inrush Current Surge
- 5. Output
- 6. Hold-up Time
- 7. Efficiency and Power Losses
- 8. Functional Diagram
- 9. Front Side and User Elements
- 10. Terminals and Wiring
- 11. Reliability
- 12. EMC
- 13. Environment
- 14. Protection Features
- 15. Safety Features
- 16. Dielectric Strength
- 17. Used Substances
- 18. Approvals
- 19. Fulfilled Standards
- 20. Physical Dimensions and Weight
- 21. Accessories
- 22. Application Notes
- 22.1. Peak Current Capability
- 22.2. Back-feeding Loads
- 22.3. Inductive and Capacitive Loads
- 22.4. Charging of Batteries
- 22.5. External Input Protection
- 22.6. Requirements for the Supplying Source
- Parallel Use to Increase Output Power
- 22.8. Parallel Use for Redundancy
- 22.9. Daisy Chaining of Outputs
- Series Operation
- 22.11. Use in a Tightly Sealed Enclosure
- 22.12. Mounting Orientations
CD5.243
CD-Series
DC/DC Converter 24V, 4A
21. ACCESSORIES
ZM1.WALL Wall mounting bracket
This bracket is used to mount specific DIMENSION units onto a flat surface without utilizing a DIN-Rail. The two
aluminum brackets and the black plastic slider of the unit have to be removed, so that the two steel brackets can be
mounted.
Fig. 21-1 ZM1.WALL Wall mounting bracket Fig. 21-2 Assembled wall mounting bracket *)
*) Picture of the DC/DC converter is for representation only
ZM11.SIDE Side mounting bracket
This bracket is used to mount Dimension units sideways with or without utilizing a DIN-Rail. The two aluminum
brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted.
For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on
the steel bracket.
Fig. 21-3
ZM11.SIDE Side mounting bracket *)
Fig. 21-4
Side mounting with DIN-rail brackets *)
*) Picture of the DC/DC converter is for representation only
Oct 2009 / Rev. 1.0 DS-CD5.243-EN
All parameters are specified at 24V, 4A, 12Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
16/21