Data Sheet
Table Of Contents
- 1. Intended Use
- 2. Installation Instructions
- 3. AC-Input
- 4. DC-Input
- 5. Input Inrush Current
- 6. Output
- 7. Hold-up Time
- 8. Efficiency and Power Losses
- 9. Functional Diagram
- 10. Front Side and User Elements
- 11. Connection Terminals
- 12. Lifetime Expectancy
- 13. MTBF
- 14. EMC
- 15. Environment
- 16. Safety and Protection Features
- 17. Dielectric Strength
- 18. Approved, Fulfilled or Tested Standards
- 19. Regulatory Product Compliance
- 20. Physical Dimensions and Weight
- 21. Accessories
- 21.1. ZM1.WALL - Wall/Panel Mount Bracket
- 21.2. ZM12.SIDE - Side Mount Bracket
- 21.3. YRM2.DIODE - Redundancy Modules
- 21.4. YR20.246 - Redundancy Module
- 22. Application Notes
- 22.1. Peak Current Capability
- 22.2. Charging of Batteries
- 22.3. Series Operation
- 22.4. Parallel Use to Increase Output Power
- 22.5. Parallel Use for Redundancy
- 22.6. Use in a Tightly Sealed Enclosure
- 22.7. Mounting Orientations
CT5.241
CT-Series
3-PHASE, 24V, 5A, 120W
Aug. 2021 / Rev. 2.1 DS-CT5.241-EN All values are typical figures specified at 400Vac, 50Hz input voltage, 24V, 5A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
20/28
21. A
CCESSORIES
21.1. ZM1.WALL - WALL/PANEL MOUNT BRACKET
These brackets are used to mount the device on a flat surface or panel without utilizing a DIN rail.
The two aluminum brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can
be mounted in the holes of the aluminum brackets.
The order number ZM1.WALL contains two brackets needed for one device.
Fig. 21-1 ZM1.Wall Fig. 21-2 Hole pattern Fig. 21-3 Side view
All dimensions in mm
All dimensions in mm
Fig. 21-4 Isometric view- Fig. 21-5 Isometric view Fig. 21-6 Isometric view