Datasheet

CT5.241
CT-Series
3-PHASE, 24V, 5A, 120W
4. DC-INPUT
Do not use the power supply with DC-input voltages.
5. INPUT INRUSH CURRENT
An active inrush limitation circuit limits the input inrush current after turn-on of the input voltage and after short
input voltage interruptions.
The charging current into EMI suppression capacitors is disregarded in the first microseconds after switch-on.
AC 400V AC 480V
Inrush current Max. 10A
peak
10A
peak
Temperature independent
Typ. 4A
peak
4A
peak
Temperature independent
Inrush energy Max. 0.5A
2
s 0.5A
2
s Temperature independent
Fig. 5-1 Typical input inrush current
behaviour at nominal load and 25°C ambient
1 >
6/27
2 >
3 >
20ms/DIV
Input current 2A/DIV
Input voltage 500V/DIV
Output voltage
May 2018 / Rev. 2.0 DS-CT5.241-EN All values are typical figures specified at 400Vac, 50Hz input voltage, 24V, 5A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany