Datasheet

CP5.241, CP5.241-C1, CP5.241-S1,
CP5.241-S2, CP5.242
CP-Series
24V, 5A, 120W, SINGLE PHASE INPUT
Feb. 2018 / Rev. 0.3 DS-CP5.241-EN All parameters are typical values specified at 230Vac, 50Hz input voltage, 24V, 5A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
P R E L I M I N A R Y
19. APPROVALS
EC Declaration of Conformity
planned
The CE mark indicates conformance with the
- EMC directive,
- Low-voltage directive and the
- ATEX directive
IEC 60950-1
2
nd
Edition
planned
CB Scheme for I.T.E.
Information Technology Equipment
IEC 62368-1
2
nd
Edition
planned
CB Scheme for I.C.T.
Information and Communication Technology
IEC 61010-2-201
2
nd
Edition
planned
CB Scheme,
Safety requirements for electrical equipment for
measurement, control, and laboratory use - Part 2-201:
Particular requirements for control equipment
ANSI/UL 61010-2-201
(former UL 508)
planned
Ind. Cont. Eq.
Listed as Open Type Device for use in Control Equipment
UL Category NMTR, NMTR7
E-File: E198865
ANSI/ISA 12.12.01
Class I Div 2
planned
Process Cont. Eq.
Listed for use in Hazardous Location Class I Div 2
EN 60079-0, EN 60079-7
ATEX
planned
II 3G Ex ec nC II TX Gc
Approval for use in hazardous locations Zone 2 Category 3G.
Number of ATEX certificate: T.B.D.
IEC 60079-0, IEC 60079-7
planned
IECEx
Suitable for use in Class 1 Zone 2 Groups IIa, IIb and IIc
locations. Number of IECEx certificate: T.B.D.
EAC TR Registration
planned
Registration for the Eurasian Customs Union market
(Russia, Kazakhstan, Belarus)
20. OTHER FULFILLED STANDARDS
RoHS Directive Directive 2011/65/EU of the European Parliament and the
Council of June 8
th
, 2011 on the restriction of the use of
certain hazardous substances in electrical and electronic
equipment.
REACH Directive Directive 1907/2006/EU of the European Parliament and the
Council of June 1
st
, 2007 regarding the Registration,
Evaluation, Authorisation and Restriction of Chemicals
(REACH)
IEC/EN 61558-2-16
(Annex BB)
Safety Isolating
Transformer
Safety Isolating Transformers corresponding to Part 2-6 of the
IEC/EN 61558
19/28