Data Sheet

CP20.241, CP20.241-C1, CP20.241-S1,
CP20.241-S2, CP20.241-V1, CP20.242
CP-Series
24V, 20A, 480W, SINGLE PHASE
Sep. 2018 / Rev. 1.0 DS-CP20.241-EN - All parameters are typical values specified at 230Vac, 50Hz input voltage, 24V, 20A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
24.9. MOUNTING ORIENTATIONS
Mounting orientations other than input terminals on the bottom and output on the top require a reduction in
continuous output power or a limitation in the maximum allowed ambient temperature.
The listed lifetime and MTBF values from this datasheet apply only for the standard mounting orientation.
The following curves give an indication for allowed output currents for altitudes up to 2000m (6560ft).
Fig. 24-7
Mounting
Orientation A
(Standard
orientation)
Power
Supply
OUTPUT
Allowed Output Current at 24V
0
+45 +70°C
15A
20A
24A
Ambient Temperature
INPUT
+60
Fig. 24-8
Mounting
Orientation B
(Upside down)
Power
Supply
Allowed Output Current at 24V
32/32
OUTPUT
INPUT
0
+30 +70°C
15A
24A
Ambient Temperature
+60
Fig. 24-9
Mounting
Orientation C
(Table-top
mounting)
Allowed Output Current at 24V
0
+25 +70°C
13A
24A
Ambient Temperature
+60
Fig. 24-10
Mounting
Orientation D
(Horizontal cw)
Powe
Supp
Allowed Output Current at 24V
0
+25 +70°C
13A
24A
r
ly
OUTPUT
INPUT
Ambient Temperature
+60
Fig. 24-11
Mounting
Orientation E
(Horizontal ccw)
Power
Supply
OUTPUT
INPUT
Allowed Output Current at 24V
0
+25 +70°C
13A
24A
Ambient Temperature
+60