Data Sheet
Table Of Contents
- 1. Intended Use
- 2. Installation Instructions
- 3. AC-Input
- 4. DC-Input
- 5. Input Inrush Current
- 6. Output
- 7. Hold-up Time
- 8. DC-OK Relay Contact
- 9. Remote ON / OFF Function
- 10. Efficiency and Power Losses
- 11. Functional Diagram
- 12. Front Side and User Elements
- 13. Connection Terminals
- 14. Lifetime Expectancy
- 15. MTBF
- 16. EMC
- 17. Environment
- 18. Safety and Protection Features
- 19. Dielectric Strength
- 20. Approvals
- 21. Other Fulfilled Standards
- 22. Physical Dimensions and Weight
- 23. Accessories
- 24. Application Notes
CP20.241, CP20.241-C1, CP20.241-S1,
CP20.241-S2, CP20.241-V1, CP20.242
CP-Series
24V, 20A, 480W, SINGLE PHASE
Sep. 2018 / Rev. 1.0 DS-CP20.241-EN - All parameters are typical values specified at 230Vac, 50Hz input voltage, 24V, 20A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
23. ACCESSORIES
23.1. ZM5.WALL – WALL/PANEL MOUNT BRACKET
This bracket is used to mount the devices on a wall/panel without utilizing a DIN-Rail and can be mounted without
detaching the DIN-rail brackets of the power supply.
Fig. 23-1 Isometric view
(Picture shows the CP20.241)
Fig. 23-2 Isometric view-
(Picture shows the CP20.241)
Fig. 23-3 Isometric view
(Picture shows the CP20.241)
Fig. 23-4 Wall/panel mounting,
front view
(Picture shows the CP20.241)
Fig. 23-5 Hole pattern for wall
mounting
Fig. 23-6 Wall/panel mounting,
side view
(Picture shows the CP20.241)
All dimensions in mm
All dimensions in mm
All dimensions in mm
23/32