Data Sheet
Table Of Contents
- 1. Intended Use
- 2. Installation Instructions
- 3. AC-Input
- 4. DC-Input
- 5. Input Inrush Current
- 6. Output
- 7. Hold-up Time
- 8. DC-OK Relay Contact
- 9. Remote ON / OFF Function
- 10. Efficiency and Power Losses
- 11. Functional Diagram
- 12. Front Side and User Elements
- 13. Connection Terminals
- 14. Lifetime Expectancy
- 15. MTBF
- 16. EMC
- 17. Environment
- 18. Safety and Protection Features
- 19. Dielectric Strength
- 20. Approvals
- 21. Other Fulfilled Standards
- 22. Physical Dimensions and Weight
- 23. Accessories
- 24. Application Notes
CP20.241, CP20.241-C1, CP20.241-S1,
CP20.241-S2, CP20.241-V1, CP20.242
CP-Series
24V, 20A, 480W, SINGLE PHASE
Sep. 2018 / Rev. 1.0 DS-CP20.241-EN - All parameters are typical values specified at 230Vac, 50Hz input voltage, 24V, 20A output load,
25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone +49 89 9278 0 Germany
22. PHYSICAL DIMENSIONS AND WEIGHT
Width 48mm 1.89’’
Height 124mm 4.88’’
Depth 127mm 5.0’’
The DIN-rail height must be added to the unit depth to calculate the total required
installation depth.
Weight 830g / 1.83lb
DIN-Rail Use 35mm DIN-rails according to EN 60715 or EN 50022 with a height of 7.5 or 15mm.
Housing material Body: Aluminium alloy
Cover: zinc-plated steel
Installation clearances See chapter 2
Penetration protection Small parts like screws, nuts, etc. with a diameter larger than 5mm
Fig. 22-1 Front view
CP20.241 CP20.241-S1 CP20.241-S2 CP20.241-V1
CP10.241-C1
CP10.242
Fig. 22-2 Side view
All dimensions in mm
All dimensions in mm
22/32