Instruction manual

Page 8
Installation and Operation
VIS 300/400 EN Setup Software
2.5.1 Camera Property Menus
Using the commands on the File menu the camera properties can be Imported or Exported from or to
files, or printed out.
FIGURE 9. Camera Property File Menu
2.5.1 (a) File=>Import Settings from File to Camera
The Import Settings from File to Camera command opens a file-open dialog box for selecting the
camera-settings file to import into the selected camera. This feature will set up all camera properties
including camera-specific settings like the static IP-address and User Information so it will for instance
be used for “Restoring” the settings from file to a new camera if the camera hardware has been replaced.
If only the “System specific” settings need to be setup then please use the Edit Copy Settings from
Camera and Edit Paste Settings to Camera(s) instead!
2.5.1 (b) File=>Export Settings from Camera(s) to File(s)
The Export Settings from Camera(s) to File(s) command opens a file-save dialog box for selecting the
names of the camera-settings files to save. Default filenames will be generated automatically based on
camera IP-address and date/time. This feature will “Backup” all camera properties including camera-
specific settings like the static IP-address and User Information so it can be used for “Restoring” the
settings from file to a new camera if the camera hardware has been replaced.