Instruction manual

Page 53
Appendix
TM-1405GE Hardware
10 Appendix
10.1 Specifications
Table 13. TM-1405GE Camera Specifications Table
Feature TM-1405GE
Imager 1/2” progressive scan interline transfer CCD
Active Area 6.47mm x 4.84mm
Active Pixels 1392 (H) x 1040 (V)
Cell Size 4.65µm x 4.65µm
Display Mode
(Active Pixels)
1392 (H) x 1040 (V) @ 30 Hz
Sync
Internal/External auto switch
HD/VD, 4.0 Vp-p impedance 4.7 K ohms
VD=30.00 Hz±5%, non-interlace
HD=31.1kHz±2%
Data Clock Output 50.00 MHz
Resolution Digital: 1392 (H) x 1040 (V)
S/N Ratio 51dB min.
Min. Illumination
Monochrome= 0.3 lux; Color= 2.0 lux
f = 1.4 without IR cut filter (no shutter) Sensitivity: 11.5µV/e-
Video Output
Analog: 714 mV, 75 ohms, (750 mV white clip)
Digital output: 8-bit / 10-bit
Gigabit Ethernet (selectable)
Gamma Programmable LUT (1.0 std.)
Lens Mount C-mount (use >1/2” format lenses or larger)
Power Requirement 12V DC, ±10%, 420mA 23°C, 12V DC (typical at 25°C)
Operating Temp.
-10°C to 50°C
*
*. Refer to Section 7.2.1 on page 32 for information on camera heat dissipation. Image quality degrades
with increasing temperature.
Vibration 7 Grms (10 Hz to 2000 Hz) Random, 11 ms half sine
Shock 70G
Size (W x H x L) 50.8mm x 50.8mm x 83.5mm
Weight 212 grams (7.47 oz.) without tripod
Optional Functions
OP 3-1, internal IR filter;
OP 3-2, optical filter removal;
OP 21, glassless CCD imager;
OP 21-UV, QUV glassless CCD imager with quartz window
Optional Accessories
Power Cable
Power Supply
12P-02S
PD-12U series