Instruction manual

Page 40
Operation
TM-1405GE Hardware
8.2.4 Sync and Data
The individual color data is exactly the same as the pixel data. This means that the timing relationships
of the color cameras are also the same as of the B/W cameras.
For a detailed timing chart, please refer to each B/W camera’s data sheet and manual.
The following diagram is an example of the TMC-4100GE default mode. FDV and LDV are used
internally for the GigE interface.
Figure 33. Example of TMC-4100GE (Same as TM-4100GE)
8.2.5 Camera Functions
AccuPiXEL color cameras perform all functions the same way as B/W cameras. However, because of
color characteristics, the LUT (Look-up Table) is different. The LUT is a powerful tool to adjust the
dynamic range as well as color dynamic range. Since human color perception is non-linear, LUT
FDV
LDV
Video
Data
1st line 2 3
BG
line
BG
line
BG
line
BG
line
BG
line
FDV
216pixels
1st line (RG line)
RG
line
RG
line
RG
line
RG
line
LDV
Green
GreenRed Red
Video
data
13 line