Instruction manual

Page 17
Configuring the TM-1405GE Camera
TM-1405GE Software
3.4.13 White Balance Control (Color Versions Only)
To determine white balance, use the following steps:
1. Select full scan mode in the GigE Camera Software tabbed dialog. shown in Figure 22.
2. Start the live video by clicking Start in the Acquisition tabbed dialog box of the main frame.
3. Select the RGB filter tab. Show the camera a piece of white paper to make sure that the image is not
saturated.
4. Click Analyze to automatically calculate the white balance.
5. Once white balance has been calculated, click Apply Results to apply white balance. You can also
assign custom gain and offset values to the R, G, and B channels. If you choose to assign custom
values, click Apply Results.
Figure 22. White Balance Control Settings
3.4.14 Main Menu: Option
The Grabber Settings tabbed dialog box has a check box to enable the test pattern that is internally
generated by the integrated camera software.
3.4.15 Version
You can view the version number of the Cam2Net camera interface application by clicking Help-->
About. The version number of the integrated GigE camera software appears in a text box control called
“Version” in the GigE Camera tabbed dialog box.
3.4.16 Exit
From the main menu, select “File,” and click “Exit” to exit the software.
Custom white
balance.
Gain/Offset
Automatic white
balance control.