Specifications

3.3 THE INTERLINE-TRANSFER
ORGANIZATION OF THE CCD IMAGE SENSORS
The TMC-7 CCD video camera module adopts an
interline-transfer organization in which the precisely
aligned photosensor and vertical transmission section
are arrayed interlinearly.
A horizontal shift register links up with the vertical
transmission section. Light variations are sensed by
the photosensors which generate electronic charges
proportional to the light intensity. The generated
charges are fed into the vertical shift registers all at
once. The charges are then transferred from the verti-
cal transmission section to the horizontal shift registers
successively and finally reach the output amplifier to
be read out successively.
3.4 INSTRUCTIONS FOR POWERING
THE TMC-7/TMC-6
Connectors
The TMC-7 requires 12 V DC (330mA). The power is
obtained through the 12-pin connector located at the
rear of the camera. PULNiX offers a 4-conductor
power cable with mating connector (model# C-10).
For Y/C output, use a 12-pin connector to supply the
power.
Horizontal
shift register
odd line
even line
odd line
Photo senser
Vertical shift register
(818 elements)
Output section
(513 elements)
12-Pin Connector
TMC-7/TMC-6 12P-02 Cable
1. GND Gray
2. +12V DC In Yellow
3. GND Red Shield
4. Video Out (VBS) Red Coax Signal
5. GND Orange Shield
6. N/C Orange Coax Signal
7. Chroma Black Coax Signal
8. GND White Shield
9. Y (B/W) White Coax Signal
10. N/C Brown
11. N/C Blue
12. N/C Black Shield
Optional output
Each pin has to be designated for various options
such as Y/C output, integration control, etc. The cus-
tomer will be required to assign option numbers.
Warning
The TMC-7 must use either the 12P Series or C-10
cable. When applying power to the camera, make
sure that none of the exposed leads on the multiple
conductor cable are touching. This may cause dam-
age to the camera. Besides the power connector,
there is a standard BNC video connector on the rear of
the camera.
3.4.1 12-PIN CONNECTOR AND POWER
CABLES
5
6
7
8
9
10
11
12
4
3
2
1
12-Pin Figure Power Connector
4