Specifications

ManualsBrandsPulnix ManualsHome building and DecorTMC-6

Speed control

Continuous shutter

By applying a negative going TTL pulse to pin #8 TRIG

input, the TMC-7 can operate with continuous shutter

speed change. The input pulse must move within a field

timing and the shutter speed is between the pulse edge

and SG1, SG2. In order to activate this function, D0, D1,

D2 must all be low (GND). Unless the TRIG pulse is

applied, CCD charges are kept discharging and when

the pulse is input, the discharge stops and integration

starts up to the transfer gate timing (SG1, SG2).

SECTION 5: RGB OPERATION (Option)

5.1 CCA-7 RGB “BREAKOUT” MODULE

CCA-7 is a compact device designed to accept cam-

era outputs via the 12P-02MF (2 - meter) cable from

the camera, and then output the signals (R, G, B,

Sync, and Video) via standard BNC connectors. It also

accepts 12V DC input via a terminal for power.

Note: RGB option is only available when TMC-7 is

modified for use with CCA-7. Contact PULNiX for

further assistance.

SECTION 6: IMAGER COLOR FILTERS

6.1 DIAGRAM OF COMPLEMENTARY STRIPE

FILTER

6.2 SPECTRAL RESPONSE WITH COMPLE-

MENTARY MOSAIC FILTER

123456

HHH

LLLL

Shutter

speed

Integ-

ration

1/60 1/125 1/250 1/500 1/1000 1/2000 1/4000 1/10000

2FLD 4FLD 6FLD 8FLD 10FLD 12FLD 14FLD 16FLD

(option)

CCA-7

R G B Sync Video

GND +12V

To Camera

(Connect 12P-02MF here)

HORIZONTAL SHIFT REGISTER

V SHIFT REGISTER

OUTPUT

COMPLEMENTARY MOSAIC FILTER

Relative Response

400 500 600 700

Wavelength (nm)

1.0

Cy G