Instruction manual

Page 35
Dual-Tap TM-4200GE AccuPiXEL Series Camera-Control Software
Introduction
6.3 Using the GigE mode
• The IP address is initially configured using the Coyote software provided by JAI. To obtain the
software visit the JAI web site, customer support link (http://www.jai.com. To review IP address
assignment see “Quick-Start” on page 4
6.4 GUI Features
The following is a list of
camera functions that PC serial
commands can control. The
Dual-Tap AccuPiXEL series
Camera Link cameras use
differential serial
communication through the
Camera Link connector on the
rear panel of the camera. The
interface shown here is for the
TM/TMC 4200 CL cameras.
FIGURE 31. Main DualTap
AccuPiXEL Window
• Exposure Control
- Mode
- Shutter Speed
- Expo / Lines
- Scan Area
• Scan
- Area
- Mode
• Gain Settings
- Master Gain
- R Fine Gain
- R Auto Gain check box
• Offset Voltage
- Master Offset
- R Fine Offset
- R Auto Offset
• Taps
• Video Depth
• Image Pre-processing
• Control Signals
• Trigger