System information

OMI 2.3.1 Release Notes
OMI 2.3.1 Release Notes 19
CVM4 Supported Cameras
CVM4 supports only the Cognex CVC-1000 camera, shown in Table 9. The table also
shows the required Cognex cable for that camera.
Note If you are using the four-camera breakout cable, be sure to connect
CVC-1000 cameras in numerical order: connect the first camera to
branch 1, the second to branch 2, and so on. Do not skip any
branches. See the hardware manual for your frame grabber for
important information on connecting CVC-1000 cameras.
CVM6 Supported Cameras
CVM6 supports the analog and digital cameras shown in Table 10. The table also shows
the required Cognex cable for each camera.
Pulnix TM-9701 EIA Progressive scan 300-0127
Pulnix TM-7EX EIA Interlaced 300-0127
Pulnix TM-6CN CCIR Interlaced 300-0136
Camera
Cognex Breakout Cable
Part Number
Cognex Camera Cable
Part Number
Cognex CVC-1000
Four-camera breakout
cable, 300-0220
300-0223
One-camera breakout
cable, 300-0224
Table 9. CVM4 camera cable part numbers
Camera
EIA/
CCIR Notes
Cognex Camera Cable
Part Number
Table 8. CVM1 supported cameras and cables
Camera Type
Cognex Camera Cable Part
Number
Sony XC-75 Analog, EIA 300-0181
Sony XC-75CE Analog, CCIR 300-0181
Sony XC-55 Analog, EIA, rapid reset 300-0231
Table 10. CVM6 supported cameras and cables