System information

OMI 2.3.1 Release Notes
OMI 2.3.1 Release Notes 15
CVM1 Supported Cameras
CVM1 has four independent acquisition channels, and allows the connection of up to
four analog cameras. Image acquisitions can occur on all four camera channels
simultaneously. The cameras that MVS-8110 frame grabbers support on CVM1 are
shown in Table 5.
Camera
EIA /
CCIR Notes
Cognex Camera
Cable Part Number
Sony XC-75 EIA
RS-170
Interlaced, full, single-field
or half-resolution
300-0099
Sony XC-75CE CCIR Interlaced, full, single-field
or half-resolution
300-0099
Sony XC-75 RR EIA
RS-170
Rapid reset version of
XC-75; half-resolution
300-0136
Sony XC-75CE RR CCIR Rapid reset version of
XC-75CE; half-resolution
300-0136
Sony XC-7500 EIA 300-0200
Sony XC-55,
Sony XC-55BB
EIA
RS-170
Rapid reset, progressive
scan, full resolution; must be
used in E-DONPISHA II
mode (set via switches)
300-0136
Sony XC-ST50 EIA
RS-170
With switches in
free-running mode; full,
single-field or half-resolution
300-0099
Sony XC-ST50CE CCIR With switches in
free-running mode; full,
single-field or half-resolution
300-0099
Sony XC-ST50 RR EIA
RS-170
With switches in rapid reset
mode; half resolution
300-0136 plus
300-0313 adapter
or
300-0316
See caution below
Table 5. CVM1 supported cameras and cables