Hardware manual

2 MVS-8100L Hardware Description
Cognex MVS-8100L Hardware Manual 31
Trigger and Strobe Expansion Panel
The trigger and strobe expansion panel, Cognex P/N 800-0062, carries trigger, strobe,
and status lines from the trigger and strobe jack, JP4, on the MVS-8100L to a DB-9F
connector on the back panel of the host PC. Figure 17 shows the trigger and strobe
expansion panel.
Figure 17. Trigger and strobe expansion panel P/N 800-0062
Figure 18 shows the pin numbering of the DB-9F connector.
Figure 18. Pin numbering of the trigger and strobe DB-9F connector
Table 10 shows the pinouts of the trigger and strobe connector and DB-9F connector.
Pin
Number
on JP4
Pin
Number
on DB-9F Signal Name
11TRIG+
32STROBE+
5 3 PWR (see note)
74STSO
Table 10. Pinout of trigger and strobe expansion panel
Pin 1
DB-9F connector
Trigger and strobe connector jack
connects to JP4 on MVS-8100L
5
6
9
1