Hardware manual

1 MVS-8100L Hardware Installation
Cognex MVS-8100L Hardware Manual 15
The old and new JP2 connectors are are not meant to be interchangeable with the two
power cables. You can mix old and new connectors and cables only as shown in
Table 2.
Older JP2 jack Newer JP2 jack
Cable
300-0175
Fits and locks together;
pull gently to remove the
plug.
Fits loosely and does not lock. Use only
for temporary or test configurations. Do
not deploy systems using this
combination.
Cable
300-0391
Does not mate; cannot
be used together.
Fits and snap-locks together. Must
press a clip on the plug to remove it.
Table 2. Interchangeability of external power cables