Product Manual

GROUNDING
INSTRUCTIONS
This appliance must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric shock. This
appliance is equipped with a cord having equipment
grounding conductor and grounding plug. The plug must be
inserted into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and
ordinances.
WARNING
Improper connection of the equipment grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or service person if you are in
doubt as to weather the outlet is properly grounded.
Do not modify the plug provided with the appliance - if it
will not fit the outlet, have a proper outlet installed by a
qualified electrician.
This appliance is for use on a nominal 120 - Volt circuit, and
has a grounded plug that looks like the plug illustrated in
sketch A below. A temporary adapter that looks like the
adapter illustrated in sketches B and C may be used to
connect this plug to a 2-pole receptacle as shown in sketch
B if a properly grounded receptacle is not available. The
temporary adapter should be used only until a properly
grounded outlet (sketch A) can be installed by a qualified
electrician. The green colored ear, lug, or the like extending
from the adapter must be connected to a permanent ground
such as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by a metal screw.
NOTE: In Canada, the use of a temporary adapter is not
permitted by the Canadian Electrical Code.
INSTRUCTIONS VISANT LA
MISE Á LA TERRE
Cet appareil doit étre mis à la terre. En cas de défaillance
ou de panne éventuelles, la mise à la terre fournit au courant
un chemin de moindre résistance qui réduit le risque de choc
électrique. Cet appareil est pourvu d’un cordon muni d’un
conducteur de terre et d’une fi che avec broche de terre. La
fi che doit être branchée dans une prise appropriée
correctment installée et mise à la terre conformement aux
réglements et ordonnances municipaux.
AVERTISSEMENT
Un conducteur de terre mal raccordé peut entrainer un
risque de choc électrique. Consulter un électricien ou n
technicien d’entretien qualifi é si vous n’êtes pas certain
que la prise est correctement mise à la terre. Ne pas
modifi er la fi che fournie avec l’appareil - si elle ne peut
être insérée dans la prise, faire installer une prise
adéquate par un électricien qualifi é.
Cet appareil est destiné à un circuit de 120 V et est muni
d’une fi che de mise à la terre semblable à celle illustrée par
le croquis A de la fi gure. Sassurer que l’appareil est branché
à une prise de courant ayant la mê confi guration que la fi
che. Aucun adaptateur ne devrait être utilisé avec cet
appareil.
Las mise à la terre selon les croquis B et C n’est pas permise
au Canada.