Product Manual

Un-pairing

Follow the computer’s operating system’s procedure to un-pair the PTS Connect adapter.

Auto-connect

The auto-connect feature allows automatic reestablishment of a connection when the

analyzer is turned off and on while a connection is established.

Microsoft Windows Operating Systems

The PTS Connect adapter typically appears as two separate COM ports, one incoming and

one outgoing. The PC’s incoming and outgoing COM ports can be seen in the PC’s

Bluetooth Settings. The outgoing COM port must be opened once to establish a

connection. Subsequent connections may use the incoming port, which supports auto-

connect functionality.

1. Pair the adapter as described above.

2. Without turning off the analyzer, make a connection from the PC’s outgoing COM

port (typically the lowest assigned COM port for the device). If the analyzer is

turned off or times out before the connection is made, the auto-connect feature will

not work and the PTS Connect adapter must be unpaired and pairing process re-

started. Right click on the Bluetooth icon and right click on Bluetooth settings and

select COM Port tab. Look for the PTS-{Bluetooth ID} address label.

3. Open the incoming COM port.

4. Connection with this port will now be re-established automatically any time the

incoming port is opened and the PTS Connect adapter is powered.

Android Operating System

1. Pair the adapter per operating system instructions.

2. Without turning off the analyzer, make a connection with the PTS Connect adapter

with an Android App. If the analyzer is turned off or times out before the connection

is made, the auto-connect feature will not work and the PTS Connect adapter must

be unpaired and pairing process re-started.

3. Connection with this port will now be re-established automatically any time the port

is opened and the PTS Connect adapter is powered.

Troubleshooting

The PTS Connect adapter cannot be discovered

 Ensure the adapter is properly plugged into the analyzer.

 Ensure the analyzer is powered on.

 Ensure the adapter is within 3 meters of the computer.

 Ensure that at least 60 seconds have elapsed between powering on the analyzer

and attempting to pair the adapter.

 Ensure that any Bluetooth filtering in the computer’s application is disabled so

that all devices may be seen.