Datasheet

Lift | Spacing 5.08 mm
AKZ1110/..-5.08-GREEN
Technical Data
Wire Sizes
Solid min 0.2 mm²
solid max 4.0 mm²
Stranded (flexible)
min
0.2 mm²
Stranded (flexible)
max
2.5 mm²
Stranded with Ferrule
min
0.25 mm²
Stranded with Ferrule
max
2.5 mm²
Dimensions
Stripped Length 7.0 mm
Materials
Clamp Brass
Screw Steel
Contact Spring Bronze
Insulating Material
Material PA 6.6
Flammability Class UL 94 V-0
Temperatures
Operating Temperature -30 °C - 105 °C
Wave Soldering Process
Soldering Temperature,
recommended
-
Peak Soldering Time,
recommended
-
Reflow Process
Soldering Temperature,
recommended
-
Peak Soldering Time,
recommended
-
Leere Zeile
Colours
RAL6018
GREEN, RAL6018
RAL7035
LIGHT GREY , RAL7035
similar RAL 6018
LIGHT GREEN, similar RAL 6018
Colours according to RAL, there may be variations on colour due to production conditions.
Special colours on request.
Counterparts (Spacing 5.08 mm)
Pin Strip/Terminal Blocks
STLZ970 STLZ990 AKZ950-INV STLZ950 AKZS950
If there are combinations with different ratings, the lower value is valid.
Order Data (Spacing 5.08 mm)
Poles Width (mm) Article Designation Article Number PU
2 10.16 AKZ1110/2-5.08-GREEN 51110020001F 200
3 15.24 AKZ1110/3-5.08-GREEN 51110030001F 200
4 20.32 AKZ1110/4-5.08-GREEN 51110040001E 100
5 25.40 AKZ1110/5-5.08-GREEN 51110050001E 100
6 30.48 AKZ1110/6-5.08-GREEN 51110060001E 100
7 35.56 AKZ1110/7-5.08-GREEN 51110070001E 100
8 40.64 AKZ1110/8-5.08-GREEN 51110080001D 50
9 45.72 AKZ1110/9-5.08-GREEN 51110090001D 50
10 50.80 AKZ1110/10-5.08-GREEN 51110100001D 50
11 55.88 AKZ1110/11-5.08-GREEN 51110110001D 50
12 60.96 AKZ1110/12-5.08-GREEN 51110120001D 50
13 66.04 AKZ1110/13-5.08-GREEN 51110130001D 50
14 71.12 AKZ1110/14-5.08-GREEN 51110140001D 50
15 76.20 AKZ1110/15-5.08-GREEN 51110150001D 50
Accessories
Figure Designation Article Number
Bridge, 2-pole, insulated, BRI/2-5.0/5.08-
LIGHT GREY
50000000006
Bridge, 3-pole, insulated, BRI/3-5.0/5.08-
LIGHT GREY
50000000007
Bridge, 2-pole, BR/2-5.0/5.08-L7.0 50000000008
Coding star CS1-5.0/5.08-RED 50000000021
Serie AK(Z)1110 mit Trennelement on request
Series AK(Z)1110 with pull reliefs on request
Ratings
Usegroup B C D
Rated Voltage 300 V 150 V 300 V 250 V
Rated Current 15 A 15 A 10 A 10 A
Overvoltage Category III
Rated Wire Size min max
solid AWG 22-10 AWG 22-10 AWG 22-10 0.5 mm² 2.5 mm² (10 A)
stranded AWG 22-10 AWG 22-10 AWG 22-10 0.5 mm² 2.5 mm² (10 A)
Torque 0.50 Nm 0.50 Nm 0.50 Nm 0.50 Nm
Screw Size M3 M3 M3 M3
Test Voltage 1.6 kV 1.6 kV 1.6 kV 4.0 kV
Pollution Degree 3
www.ptr.eu