Datasheet

Switching test probe with easy-replacement system center 160 mil
Series 3014/2G
• Switching test probe for the cable harness test
• Threaded type
• Easy replacement system
• Replacement without soldering
• Short design (24.5 mm)
• Soldering temperature max 300°C
Mechanical Data
Center 4.00 mm/ 160 mil
Full travel 5.00 mm
Working travel 4.00 mm
Switching travel 1.70 mm
Pre-loaded spring force 0.50 N
Spring force at switching travel 0.90 N
Spring force at working travel 1.50 N
Electrical Data
Receptacle - plunger
Max. current rating 3.0 A
Typical continuity resistance <= 20 mOhm
Pin - plunger
Max. current rating 1.0 A
Typical continuity resistance <= 40 mOhm
Typical insulating voltage 1000 V
Materials
Barrel brass, gold plated
Spring spring steel, gold
plated
Plunger CuBe, gold plated,
or gold plated with
insulator
Receptacle brass, gold plated
Recommended diameter of drill
HP 2361.1 (Trolitax) 3.50 mm
HGW 2371 3.51 mm
How to order:
3014/
1
2
2
G
3
-
A
4
-
1.5 N
5
-
Au oder Kappe-HTK
6
-
3.0
7
C
8
1. series 2. collar height 3. threaded design 4. tip style 5. spring force
6. tip plating 7. tip diameter 8. tip material (only for CuBe)
Tip style • Diameter • Plating
A
3.00C Au
C
1.00C Au
C
2.00C Au
3.00C Au
F
1.00C Au
F
2.00C Au
3.00C Au
F1
2.00C HTK
3.00C HTK
www.ptr.eu