Datasheet

High-current test probe for center 197 mil

Series 1075 • 1075/G

• For use in burn-in and run-in test

• Plunger separated

• Transmission of high currents

• Low contact resistance

Mechanical Data

Center 5.00 mm/ 197 mil

Full travel 5.50 mm

Working travel 4.40 mm

Pre-loaded spring force 1.50/ 1.50 N

Spring force at working travel 3.00/ 5.00 N

Electrical Data

Max. current rating 50.0 A

Typical continuity resistance <= 5 mOhm

Materials

Barrel brass, gold plated

Spring stainless steel, silver

plated

Plunger CuBe, gold plated /

Receptacle brass, gold plated

Recommended diameter of drill

with receptacle

HP 2361.1 (Trolitax) 3.98...3.99 mm

HGW 2371 3.49...3.50 mm

How to order:

1075/

3.0 N

4.0

1. series 2. threaded design 3. tip style 4. spring force 5. tip plating

6. tip diameter 7. tip material (only for CuBe)

Tip style • Diameter • Plating

4.00C Au

A6X

3.00C Au

CLX

4.00C Au

3.00C Au

4.00C Au

DNX

4.00C Ag

4.00C Au

3.00C Au

www.ptr.eu

PAGE 1
High-current test probe for center 197 mil Series 1075 • 1075/G • • • • For use in burn-in and run-in test Plunger separated Transmission of high currents Low contact resistance Mechanical Data Center 5.00 mm/ 197 mil Full travel 5.50 mm Working travel 4.40 mm Pre-loaded spring force 1.50/ 1.50 N Spring force at working travel 3.00/ 5.00 N Electrical Data Max. current rating 50.0 A Typical continuity resistance <= 5 mOhm Tip style • Diameter • Plating AX A6X CLX CX DNX 4.00C Au 3.