Datasheet

www.ptr.eu
High-Current Test Probe Raster 5.0 mm
Series 1075 • 1075/G
- For use in burn-in and run-in test
- Transmission of high currents
- Low contact resistance
Mechanical Data
Center 5.00 mm/197 mil
Full Travel 5.50 (10.00 byCLX) mm
Working Travel 4.40 (8.00 byCLX) mm
Pre-loaded Spring Force 0.80/ 1.50/ 1.50/ 2.50 N
Spring Force at Working Travel 3.00/ 3.00/ 5.00/ 10.00 N
Electrical Data
Max. Current Rating 50.0 A
Typical Continuity Resistance <= 5 mOhm
Materials
Barrel Brass, gold plated
Spring Stainless Steel, silver
plated
Plunger CuBe, gold plated/Silver
Cap
Receptacle Brass, gold plated
Recommended Diameter of Drill
mit Receptacle
HP 2361.1 (Trolitax) 3.98...3.99 mm
HGW 2372 3.49...3.50 mm
How to Order
1075/ G FX 3.0 N Au 4.0 C
1 2 3 4 5 6 7
1. Series 2. Threaded Design 3. Tip Style
4. Spring Force 5. Tip Plating 6. Tip Diameter
7. Tip Material (only for CuBe)
Tip style - Diameter - Plating
AX A6X CLX CX DNX
4.00C Au 3.00C Au 4.00C Au 3.00C Au
4.00C Au
4.00C Ag
FX KX
4.00C Au 3.00C Au
www.ptr.eu