Datasheet

www.ptr.eu
High-Current Test Probe Raster 4.0 mm
Series 1060 • 1060/G
- For use in burn-in and run-in test
- Transmission of high currents
- Low contact resistance
Mechanical Data
Center 4.00 mm/160 mil
Full Travel 5.50 mm
Working Travel 4.40 mm
Pre-loaded Spring Force 0.80 N
Spring Force at Working Travel 3.00 N
Electrical Data
Max. Current Rating 24.0 A
Typical Continuity Resistance <= 10 mOhm
Materials
Barrel Brass, gold plated
Spring Spring Steel, gold plated
Plunger CuBe, gold plated/Silver
Cap
Receptacle Brass, gold plated
Recommended Diameter of Drill
H1050 L, H1060/G-L
HP 2361.1 (Trolitax) 3.00 mm
HGW 2372 3.00 mm
H1060/GRV-L
HP 2361.1 (Trolitax) mm
HGW 2372 3.01 mm
How to Order
1060/ G FX 3.0 N Au 4.0 C
1 2 3 4 5 6 7
1. Series 2. Threaded Design 3. Tip Style
4. Spring Force 5. Tip Plating 6. Tip Diameter
7. Tip Material (only for CuBe)
Tip style - Diameter - Plating
AX A6X BAX CX DX
3.00C Au 3.00C Au 1.80C Au 2.30C Au
3.00C Au
4.00C Au
2.30C Au
3.00C Au
DX DX1 D3X FX GX
1.00C Au
1.40C Au
3.00C Au 3.00C Ag 2.30C Au
4.00C Au
6.00C Au
2.50C Au
HX H1X KX
1.80C Au 1.30C Au 3.00C Au
www.ptr.eu