User manual

HDBaseT Pro Extender
PTN Electronics Limited 5 www.PTN-electronics.com
3.2 System Diagram
Figure 3 System Diagram
3.3 Connection Procedure
Step1. Connect HDMI source (such as DVD player) to HDMI IN port of the transmitter
TPHD403PT with HDMI cable.
Step2. Connect HDBT OUT port of TPHD403PT and HDBT IN port of TPHD403PR, with
single CAT5e cable.
Step3. Connect HDMI displayer (such as HDTV) to HDMI OUT port of TPHD403PR with
HDMI cable.
Step4. Both TPHD403PT and TPHD403PR have IR IN and OUT. When one model use
for IR signal receiver, the IR signal must be sent out by the other model.
For example: When “IR IN” of TPHD403PT connects with an IR receiver, the IR
Emitter must be connected to “IR OUT” of TPHD403PR.
Step5. To set as a LAN, one of the four ETHERNET ports of TPHD403PT and
TPHD403PR should be used for Internet access, and the others can be
connected with computers.
Step6. Connect the RS232 port of the computer and the RS232 port of TPHD403PT or
TPHD403PR (any one is able to work as the RS232 signal can be transmitted
bi-directionally) by using a RS232 cable.