User Manual TPHD402P PTN HDMI/IR/RS232 Twisted Pair POC Extender All Rights Reserved Version: TPHD402P2013V1.1 www.PTN-electronics.
HDMI/IR/RS232 Twisted Pair POC Extender NOTICE: Please read this user manual carefully before using this product. This manual is for operation instruction only, not for any maintenance usage. The functions described in this version are updated till May 2013. Any changes of functions and parameters since then will be informed separately. Please refer to the dealers for the latest details. This manual is copyright PTN Electronics Limited. All rights reserved.
Table of Contents 1. Introduction .................................................................................................................1 1.1 Introduction to TPHD402P ................................................................................. 1 1.2 Features ............................................................................................................ 1 1.3 Package Contents ............................................................................................. 1 2.
HDMI/IR/RS232 Twisted Pair POC Extender 1. Introduction 1.1 Introduction to TPHD402P TPHD402P is an HDMI/IR/RS232 twisted pair including transmitter (TPHD402PT) and receiver (TPHD402PR). The TPHD402P uses HDBaseT technology to deliver HDMI signal, max transmission distance up to 70 meters with CAT5e/CAT6 cable. CEC, bi-directional RS232&IR control, and POC are supported by TPHD402P. 1.2 Features Support Full HD: Delivers high resolution image (1080p@60Hz@48 b/pixels/3D/4Kx2K).
HDMI/IR/RS232 Twisted Pair POC Extender 2. Introduction of Product Appearance 2.1 Appearance of TPHD402PT 1) IR: IR receiver. 2) ON: Working status indicator of this device. When the device works fine, this green LED will keep blinking. And it will get off when the device stops work. 3) LINK: Twisted Pair Link status indicator, green LED. It will keep on when connection is successful. 4) IN: When connected with devices support HDCP and work normally this LED will keep on.
HDMI/IR/RS232 Twisted Pair POC Extender 2.2 Appearance of TPHD402PR 1) IR: IR receiver. 2) ON: Working status indicator of this device. When the device works fine, this green LED will keep blinking. And it will get off when the device stops work. 3) LINK: Twisted Pair Link status indicator, green LED. It will keep on when connection is successful. 4) OUT: When connected with devices support HDCP and work normally this LED will keep on. If devices not support HDCP, this green LED will blink.
HDMI/IR/RS232 Twisted Pair POC Extender 3. System Connection 3.1 Usage Precautions 1) System should be installed in a clean environment and has a prop temperature and humidity. 2) All of the power switches, plugs, sockets and power cords should be insulated and safety. 3) All devices should be connected before power on. 3.2 System Diagram 3.3 Connection Procedure Step1. Connect HDMI source (such as Blue-ray DVD) to HDMI IN port of transmitter TPHD402PT with HDMI cable. Step2.
HDMI/IR/RS232 Twisted Pair POC Extender 3.4 Application TPHD402P has a good application in various occasions, such as computer realm, monitoring, big screen displaying, meeting room, education and bank & securities institution etc. 3.5 Twisted Pair Cable Connection The twisted pair used in this extender MUST be a straight-through cable.
HDMI/IR/RS232 Twisted Pair POC Extender 4. Specification Model Spec Input Input Signal Input Connector Video Signal Audio Output Output Output Connector TPHD402PT TPHD402PR 1 HDMI,1 IR & 1 RS232 HDMI female, 3.5mm mini jack, 3p captive screw connector HDMI1.4 Digital audio, transmit through HDMI audio 1 IR, 1 RJ-45 & 1 RS232 1 RJ-45, 1 IR, 1 RS232 1 HDMI, 1 IR, 1RS232 HDMI female, 3.5mm mini jack, 3p captive screw connector HDMI1.4 RJ-45, 3.5mm mini jack, 3p captive screw connector 3.
HDMI/IR/RS232 Twisted Pair POC Extender 5. Panel Drawing TPHD402PT TPHD402PR PTN Electronics Limited 7 www.PTN-electronics.
HDMI/IR/RS232 Twisted Pair POC Extender 6. Troubleshooting & Maintenance 1) When images of terminal unit output with ghost, such as the projector output with ghost. Generally this is not a unit faulty, this may be caused by an incorrect setting on the projector or a bad quality of cable. Please check the projector’s setting or try another high quality connection cable. 2) When there is a color losing or no video signal output, please check the input and output end connections of the cables.
HDMI/IR/RS232 Twisted Pair POC Extender 7. Safety Operation Guide In order to guarantee the reliable operation of the equipments and safety of the staff, please abide by the following proceeding in installation, using and maintenance: 1) The system must be earthed properly. Do not use two blades plugs and ensure the alternating power supply ranged from 100v to 240v and from 50Hz to 60Hz. 2) Do not put the device in a place of too hot or too cold.
HDMI/IR/RS232 Twisted Pair POC Extender 8. After-sales Service 1) If there appear some problems when running TPHD402P, please check and deal with the problems reference to this user manual. Any transport costs are borne by the users during the warranty. 2) You can email to our after-sales department or make a call, please tell us the following information about your cases. Product version and name. Detailed failure situations. The formation of the cases.
www.PTN-electronics.com PTN Electronics Limited Tel: +86-755-2846 1819 Fax: +86-755-8471 7796 Email: info@PTN-electronics.com Website: www.PTN-electronics.
